DigiTech GSP1101 Edit and Store a Preset, Arrows, To Edit a Preset, To Store/Copy a Preset

Quick Start

Edit and Store a Preset

The GSP1101 comes with 99 Factory presets and 99 User presets. Initially, the User presets are exact copies of the Factory presets. You can only store changes to a User preset. Factory presets can’t be changed.

To Edit a Preset

1.Press the Edit/Select knob twice.The Preset Edit screen appears.

2.Turn the Edit/Select knob to highlight an effect.

3.When the desired effect is highlighted, press the Edit/Select knob to open its Edit menu.

4.Turn the Edit/Select knob to highlight a parameter. If a triangular arrow appears to the right of a parameter, it means a sub-menu exists inside that parameter. If there is no arrow, but there is a value (like “Off” next to the “Global Cabinet” option), that means you can change the value by pressing the Edit/Select knob.

Arrows

5.Press the Edit/Select knob to edit the selected parameter.

6.Press and hold the Back button to return to the Preset screen.

7.Store your changes with the Store procedure (described below). If you don’t store your changes, they will be lost when you select another preset or turn off the GSP1101.

To Store/Copy a Preset

You can cancel this process at any time by pressing the Back button.

1.Press the Store button.The first character of the preset’s name flashes.

2.If you want to rename the preset:

Turn the Edit/Select knob to change the selected character. Turn the Gain knob to select a different character in the name.

Turn the Bass knob to move the entire name in the display. Note that characters that are “pushed” off the screen are deleted.

Turn the Midrange knob to switch the selected character between uppercase and lowercase.

3.Press the Store button again. The display reads “Location to Store” and the numeric display flashes.

4.Turn the Edit/Select knob to select a new location.

5.Press the Store button again.The preset is now saved.

GSP1101 Owner’s Manual