Global Functions
Merge In > Thru
By setting the Merge In>Thru option to ON, incoming MIDI CC and program change messages are routed out of the GSP1101’s MIDI Thru jack to other connected MIDI devices.These messages do not pass through the GSP1101 when the Merge In>Thru is set to OFF. This option is set to ON from the factory.
To configure the MERGE IN > THRU option
1.From the Preset screen, press the Edit/Select knob.
2.Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
3.Turn the Edit/Select knob until Merge
4.Press the Edit/Select knob to turn the option on or off.
5.Press the Back button to return to the previous menu.
Send MIDI Prgms
By setting the Send MIDI Prgms option to ON, MIDI program change messages will be sent out the GSP1101’s MIDI Thru jack when presets are changed on the GSP1101 either by the front panel Edit/Select knob, by selecting them in the editor librarian, or when the GSP1101 receives a program change message via MIDI. These MIDI program change messages do not get sent out of the GSP1101 when Send MIDI Prgms is set to OFF. This option is set to OFF from the factory.
MIDI Tempo
The GSP1101’s MIDI Tempo option allows incoming MIDI time code to set the delay time of the delay effects. When this option is set to ON, the GSP1101 delays respond to MIDI time messages it receives.
To set the MIDI Tempo
1.From the Preset screen, press the Edit/Select knob.
2.Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
3.Turn the Edit/Select knob until Merge Tempo is selected.
4.Press the Edit/Select knob to turn the option on or off.
5.Press the Back button to return to the previous menu.
Preset Load
From the factory the GSP1101 is set to automatically load presets when they are selected using the Edit/Select knob. Presets can be loaded manually if needed by setting the Preset Load option to MANUAL. This way you can cue up a preset and it is not loaded until the Edit/Select knob is pressed. If you don’t load a preset after four seconds, the numeric display returns to the current preset.
To set the Preset Load setting
1.From the Preset screen, press the Edit/Select knob.
2.Turn the Edit/Select knob until Preset Load is selected.
3.Press the Edit/Select knob to choose between AUTO or MANUAL option.
4.Press the Back button to return to the previous menu.
GSP1101 Owner’s Manual
50
