DirecTV SD-HBH, HBH-SA manual Programming the remote control, Code Entry

Programming the remote control

Code Entry

You can operate your TV, VCR, SAT, AUX device, or DVD (HRMC-11 and HRMC-12 only) devices using your remote control. Use the Code Entry or Code Scanning method to program the remote control. Using the Code entry method may be quicker, but you’ll need to know the correct manufacturer’s control codes for each component you want to operate. Code scanning may be more time-consuming, but you don’t need to know manufacturer’s control codes.

1.Keep your remote control aimed at the device you want to control during this process. The remote control will send out the “power” command for the device being programmed.

2.Press and hold the device key (for example, TV)

3.Press press the MUTE key for two seconds.

4.Release both keys.

The device key should light and remain lit. If it doesn’t remain lit, repeat steps 1 through 4 above.

5. Choose one of the programming methods described below:

Use the REMOTE pane under the System Setup menu tab to program your HRMC-11, HRMC-12, or HRMC-13 remote control to operate your TV, VCR, SAT, AUX device, or DVD (HRMC-11 and HRMC-12 only). The AUX menu button can be used to control a CATV box or other type of device. Use the menu buttons to choose the desired type of device and display a brand name menu list from which you can select the manufacturer of your device.

REMOTE		Wed, Oct 30	11:53AM
Install	Remote Control Settings
Signal
	Remote ID	Unit 1
Info
Features	TV
VCR	AUX	Brand
Prefs	VCR
Remote
	DVD	A Mark
Test
		Akai
New Card
		Amstrad
Upgrade
	Factory Defaults	Anam
Watch TV
		AOC
Main Menu		Audiovox
		Blaupunkt

Highlight the device you want to select. Press SELECT

1.Aim your remote control at the TV you want to use.

2.Hold down the TV button.

3.Press the MUTE button for one second.

4.Release both buttons together.

5.The TV button glows and remains lit. If the button does not

001, 034, 038, 083, 199

Device codes appear in the menu pane for the brand selected. Step-by-step onscreen help guides you through the procedure. Appendix B – Manufacturers device control codes, on page 41 also provides a complete list of device codes.

14 Using the remote control