Presets, Recall, Stream Number | Dolby Laboratories P/N 91659

DolbyRemote Installation and Operation	Dolby Digital Parameters

Stream Number

Stream Number shows the stream number for a pre-encoded bitstream present at the reference input.

4.6.2Reference Input Subcode Status Bits

These show the format, sample rate and audio bit as indicated in the subcode of the reference input signal.

4.7Presets

Presets 29 through 32 are factory defaults and cannot be overwritten.

Figure 4-8 Presets Tab

4.7.1Recall

Click on any of the 32 preset buttons to recall one of the 32 complete configurations for the encoder. These presets are stored internally within the decoder, not within the DolbyRemote application. Saved presets may be recalled from either the remote application or the front panel.

4-15

Page 31

Image 31

Dolby Laboratories P/N 91659 manual Presets, Reference Input Subcode Status Bits, Recall, Stream Number

Contents

DolbyRemote Far East Dolby Laboratories IncCorporate Headquarters European Licensing Liaison Office Table of Contents Opening a Device Further Information DolbyRemote Open Device Window List of FiguresPage PC System Requirements DolbyRemote OverviewDolbyLoad Requirements Encoder Firmware Software Installation Microsoft DLL Files Cable InstallationPage Port Starting DolbyRemoteDevice Type Communications Address Off-Line 3DolbyRemote Window Additional Devices Removing Devices Save Configuration File Saving and Restoring ConfigurationsExporting Configurations Open Configuration FilePage Input Meters Audio Service Parameters Data Rate Audio Coding ModeClock Source Bitstream Mode LFE EnableDialog Normalization Bypass Audio BandwidthEncoder Control Pass Through Unit Name Coding Delay Input Filtering Preprocessing Dynamic Range Compression Surround Channel Processing Input Level Meter Line Mode and RF ModeBitstream Info Bitstream Information Audio Production Information Dual Mono Mix Level, Room Type and Info Exists Audio Service ConfigurationInput Level, Line Mode and RF Mode Dialog Normalization Input Input and Output Settings Channel Assignment OutputAux Data Source Audio Bit Multiplex ModeInput Subcode Status Bits Test Tone Generation Input Reference InputStream Number Reference Input Stream Number PresetsReference Input Subcode Status Bits Recall Number ConfigureSave Current Configuration Time Code Parameters Status PresetCurrent Time Code Start Time Code and Stop Time Code Values Resume Select Stereo Music in the Preset Pending field General Opening a DeviceDP569/DP567 DP561 Am 530 p.m., Monday Friday Further Information

Dolby Laboratories P/N 91659 Presets, Reference Input Subcode Status Bits, Recall, Stream Number

Models: P/N 91659

Stream Number

4.6.2Reference Input Subcode Status Bits

4.7Presets

Figure 4-8 Presets Tab

4.7.1Recall