Dynex DX-RCRT20-09 manual Adjusting the volume, Setting up the channels

18 Using your TV

3Press ENTER.

Viewing the program guide (digital TV only)

To view the program guide:

• Press GUIDE on the remote control to display the program guide.

Adjusting the volume

To adjust the volume:

•Press VOL+ to increase the volume or VOL– to decrease the volume.

•Press MUTE to mute the sound. Press MUTE again to restore the sound (you can also restore the sound by pressing VOL+).

Setting up the channels

The first time you turn on the TV, you should use AUTO SCAN to automatically set up the available channels on your TV. This lets you use the CH – or CH + buttons to go to the previous or next channels.

To set up the channels:

1Press MENU on the TV or remote control. The on-screen display (OSD) opens.

2Press VOL+ or VOL– to select CHANNEL, then press CH –. The CHANNEL menu opens.

3Press CH + or CH – to select RECEPTION, then press VOL+ or VOL– to select the signal mode you want. You can select:

•AIR–Analog and digital antenna signals,

•CABLE–Analog and digital cable signals.

4Press CH + or CH – to select AUTO SCAN, then press VOL+ to begin scanning for channels.

The TV begins to search for, and memorize, all available TV channels. This process takes several minutes. When the scan is complete, the lowest memorized channel is displayed. If you press MENU during the scan, the scan is cancelled and the lowest memorized channel is displayed.