Edimax Technology AR-7286WNB user manual Bridge Mode, Field, Description

The following table describes the parameters in this page:

Field	Description
Country	Select the country you are in.
ISP	Select your Internet Service Provider (ISP).
	Virtual path identifier (VPI) is the virtual path between two
VPI	points in an ATM network. Its valid value is between 0 and
	255. Enter the correct VPI provided by your ISP.
	Virtual channel identifier (VCI) is the virtual channel between
VCI	two points in an ATM network. Its valid value is between 1
	and 65535. Enter the correct VCI provided by your ISP.
Connection	Select a connection type from the dropdown list. You may
	select PPPoE/ PPPoA/ Dynamic IP/ Static IP/ Routered IP/
Type	Bridge.

5.3.2.Bridge Mode

Select Bridge Mode, click NEXT, and the page shown in the following figure will appear.

43