Edimax Technology AR-7286WNB IP Common Options, VC-Mux, 1483 Routed IP LLCIPoA or 1483 Routed

The following table describes the parameters of this page:

Field	Description
IP Common Options
	You can choose 1483 Bridged IP LLC, 1483 Bridged IP
Encapsulation	VC-Mux,1483 Routed IP LLC(IPoA) or 1483 Routed
	IP VC-Mux.
IP Unnumbered	You can choose Activated or Deactivated.
	You can enable or disable the default route. If
Default Route	enabled, the current PVC will be the default gateway
	to the Internet from this device.
TCP MTU Option	You can set a TCP MTU value. The range is from 100
	to 1500. The default is 1492.
IPv4 Address
	Select whether to enable Network Address
	Translation (NAT) function. If you do not enable NAT,
NAT	you must add a route on the uplink equipment,
	otherwise Internet access will fail. Normally NAT is
	enabled.
	Select this option to specify the Routing Information
Dynamic Route	protocol (RIP) version. You can select RIP1, RIP2-Bor
	RIP2-M.
	You can select None, Both, IN Only or OUT Only to
	specify the RIP direction. None is for disabling the
	RIP function. Both means the ADSL Router will
	periodically send routing information and accept
Direction	routing information then incorporate into routing
	table. IN only means the ADLS router will only
	accept but will not send RIP packets. OUT only
	means the ADLS router will only send but not accept
	RIP packets.
	IGMP (Internet Group Multicast Protocol) is a
Multicast	session-layer protocol used to establish membership
	in a multicast group. The ADSL Router supports both
	50