Edimax Technology AR-7286WNB user manual Dynamic IP Address, Field, Description

The following table describes the parameters in this page:

Field	Description
	Virtual path identifier (VPI) is the virtual path between two
VPI	points in an ATM network. Its valid value is between 0 and
	255. Enter the correct VPI provided by your ISP. By default,
	VPI is set to 8.
	Virtual channel identifier (VCI) is the virtual channel between
VCI	two points in an ATM network. Its valid value is between 1
	and 65535. Enter the correct VCI provided by your ISP. By
	default, VCI is set to 35.
Connection	You can select LLC or VC-Mux. In this example, the
Type	encapsulation mode is set to 1483 Bridged IP LLC.

5.3.3.Dynamic IP Address

For configuration method, please refer to that of Auto setup by ISP list Select Auto setup by ISP list, click NEXT, and the page as shown in the following figure appears.

The following table describes the parameters in this page:

Field		Description
Country		Select the country you are in.
ISP		Select your Internet Service Provider (ISP).
		Virtual path identifier (VPI) is the virtual path between two
VPI		points in an ATM network. Its valid value is between 0 and
		255. Enter the correct VPI provided by your ISP.
VCI		Virtual channel identifier (VCI) is the virtual channel between
	44