The following table describes the parameters and buttons of this page:
Field | Description |
ACL Rule Index | You can establish sixteen ACL rules at most. |
Active | Click to enable or disable the rule. |
Secure IP | The rule is valid if the IP is in this range. |
Address |
|
Application | Support Web, FTP, Telnet, SNMP, Ping or ALL. |
Interface | Support WAN, LAN or Both. |
Access control | Only the devices whose MAC addresses are listed in the |
Listing | Access Control Listing can access the router. |
5.6.2.Filter
Choose Access Management > Filter, and the page shown in the following figure appears. Select IP/MAC Filter type. The user can set IP/MAC Filter, Application Filter and URL Filter.
5.6.2.1. IP/MAC Filter
Choose Access Management > Filter, select IP/MAC Filter from the drop- down list Filter Type Selection, and the page shown in the following figure appears. The user can set different IP filter rules of a given protocol (TCP, UDP or ICMP) and a specific direction (incoming, outgoing, or both) to filter the packets.
78
