Edimax Technology AR-7286WNB user manual Static IP Address, Bridge Mode, Field, Description

Field	Description
	two points in an ATM network. Its valid value is between 1
	and 65535. Enter the correct VCI provided by your ISP.
Connection	Select a connection type from the dropdown list. You may
	select PPPoE/ PPPoA/ Dynamic IP/ Static IP/ Routered IP/
Type	Bridge.

Bridge Mode.

Static IP Address

Select Static IP Address, click NEXT, and the page as shown in the following figure will appear.

The following table describes the parameters in this page:

Field		Description
		Virtual path identifier (VPI) is the virtual path between two
VPI		points in an ATM network. Its valid value is between 0 and
		255. Enter the correct VPI provided by your ISP. By default,
		VPI is set to 8.
		Virtual channel identifier (VCI) is the virtual channel between
VCI		two points in an ATM network. Its valid value is between 1
		and 65535. Enter the correct VCI provided by your ISP. By
		default, VCI is set to 35.
IP Address		Enter the IP address provided by your ISP.
Subnet		Enter the subnet mask provided by your ISP.
	45