Using the effects of the internal sound generator

Mod Rate (Modulation Rate)

0–127

Specifies the speed (frequency) at which the chorus sound will be modulated. Higher settings produce faster modulation.

Mod Depth (Modulation Depth)

0–127

Specifies the depth of modulation for the chorus sound. Higher settings will produce deeper modulation.

Feedback

0–127

Specifies the level of the chorus sound that will be re-input to the chorus (i.e., the amount of feedback). Feedback lets you produce a denser chorus sound. Increasing this value will raise the feedback level.

Send to Reverb

0–127

Specifies the amount of chorus sound that will be sent to reverb. Higher settings will increase the amount that is sent to reverb.

■EQ (Equalizer)

You can make equalizer settings for the output of the sound generator section.

EQ1L: EQ for the left channel (Lch) of the OUTPUT 1 stereo output

EQ1R: EQ for the right channel (Rch) of the OUTPUT 1 stereo output

EQ2L: EQ for the left channel (Lch) of the OUTPUT 2 stereo output

EQ2R: EQ for the right channel (Rch) of the OUTPUT 2 stereo output

EQ Switch

Off, On

Switches the equalizer on/off.

 

EQ1 Low Frequency

200/400 Hz

EQ2 Low Frequency

200/400 Hz

Specify the frequency at which the low range will be adjusted.

EQ1 Low Gain

-15–+15

EQ2 Low Gain

-15–+15

Specify the gain (amount of boost or cut) of the low range. Increasing this setting in the positive direction will emphasize the low range.

EQ1 High Frequency

2000/4000/8000 Hz

EQ2 High Frequency

2000/4000/8000 Hz

Specify the frequency at which the high range will be adjusted.

EQ1 High Gain

-15–+15 dB

EQ2 High Gain

-15–+15 dB

Specify the gain (amount of boost or cut) of the high range. Increasing this setting in the positive direction will emphasize the high range.

42