Controlling the SD-80 via MIDI

Changing the MFX type (Native mode)

To change the effect type of the enhanced sounds selected for parts 1–3, transmit the following system exclusive message.

Patch Common

MFX1

MFX Type

MFX Type Number

F0 41 10 00 48 12 [p1 p2 06 00] [tt] [ss] F7

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(1)Exclusive status

(2)ID (Roland : 41H)

(3)Device ID

(4)Model ID (SD-90 : 00H 48H)

(5)Command ID (Data set : 12H)

(6)Address

(7)Data

(8)Checksum

(9)End of Exclusive

Address (p1 p2): when changing the insertion effect of part 1 = 11 00

 

when changing the insertion effect of part 2 = 11 20

 

when changing the insertion effect of part 3 = 11 40

 

:

Data (tt):

Effect type number

For details on effect types, refer to "MFX parameter list" (p. 80), and to “Each Multi-

Effects Parameters” (MFX_E.pdf) on the included CD-ROM. No effect is assigned to

Effect Type number 00 (THROUGH).

Checksum (ss): For details on the calculation method, refer to the section “How to calculate the checksum” within “MIDI Implementation” (MIDIImp_E.pdf) on the included CD- ROM.

*This is valid if the part 1--3 Part Output Assign and Part Output MFX Select (p. 38) have not been changed since a Native Reset message was received.

<Example> Specifying 14: STEREO CHORUS as the effect of an enhanced sound for part 2

Transmit the following system exclusive data.

 

 

Patch Common

 

 

Multitimbre

MFX1

MFX Type

 

 

 

MFX Type

Mode Part 1

 

 

 

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

F0 41 10 00 48 12 [11 20 06 00] [0E] [3B] F7

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Using MFX with other parts (Native mode)

By transmitting the following system exclusive message, the insertion effect used by the enhanced sounds selected for parts 1–3 can be used by other parts. The output of all parts that use that MFX will be mixed and sent to the MFX.

•Do not change the MFX source of the three insertion effects after a Native Reset message is received.

•This will not work if effect type 00 (no effect: THROUGH) has been specified for the enhanced sounds selected for parts 1–3.

•Any control performed on the MFX will apply equally to all parts that use that MFX.

1.Transmit Output Select = MFX to specify MFX as the output of the part.

Address (pp): when using the MFX for part 1 = 20

when using the MFX for part 2 = 21

:

when using the MFX for part 32 = 3F

Part

Output

Assign 00 (=MFX)

F0 41 10 00 48 12 [10 00 pp 1F] [00] [ss] F7

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

64