Controlling the
Switching sounds in GM2 mode
Transmit bank select LSB (CC#32) and program change (PC#).
*Bank select MSB (CC#00) is used to switch the part mode. Inst part and Drum part correspond to the following numbers.
Inst part | Drum part |
|
|
121(79H) | 120 (78H) |
<Example> Specifying part 11 as a GM2 Inst part (009: Celesta 2)
MIDI CH= | 11 | ... specify MIDI channel 11 |
CC#00 | 121 | ... set as a GM2 Inst part |
CC#32 | 0 | ... specify variation number 000 |
PC# | 9 | ... specify program change number 009 |
Switching sounds in Native mode
Transmit bank select LSB (CC#32) and program change (PC#).
*Bank select MSB (CC#0) is used to switch the Part Mode. The number corresponds to Inst part or Drum part as follows:
| Inst part |
|
| Drum part |
|
|
|
|
|
80 (50H) | Special 1 set | — |
| — |
81 (51H) | Special 2 set | — |
| — |
87 (57H) | User set | 86 (56H) | User set | |
96 (60H) | Classical set | 104 | (68H) | Classical set |
97 (61H) | Contemporary set | 105 | (69H) | Contemporary set |
98 (62H) | Solo set | 106 (6AH) | Solo set | |
99 (63H) | Enhanced set | 107 | (6BH) | Enhanced set |
<Example> Specifying part 11 as an Inst part (009: Celesta 2) of the Classical set
MIDI CH= | 11 | ... specify MIDI channel 11 |
CC#00 | 96 | ... set as an Inst part of the Classical set |
CC#32 | 0 | ... specify variation number 000 |
PC# | 009 | ... specify program change number 009 |
Switching sounds in GS mode
Transmit bank select MSB and program change.
*Leave the bank select LSB set at 0.
Actual transmission of MIDI messages
When you input MIDI messages into sequencer software on your computer for transmission to the
1.Value of control change 0: MIDI bank number MSB (variation number)
2. | Value of control change 32: | MIDI bank number LSB (*1) |
3. | Value of program change: | MIDI program number (instrument number) |
(*1)Refer to the explanation of the bank select lower byte (LSB) (see the following section).
The bank select message consists of steps 1 and 2. Bank Select messages are one form of control change message. Processing of the bank select is suspended until the program change is received.
the Controlling MIDI via
59