Edirol UM-1EX owner manual OMS settings

■OMS settings

If you are using FreeMIDI, proceed to “FreeMIDI settings” (p. 31).

1.Operation of the UM-1EXSet the UM-1EX’s ADVANCED (mode select) Switch to the ON position.

2.Operation of the UM-1EXConnect the UM-1EX to your Macintosh.

*Connect the cable to the USB connector of the Macintosh itself, not to the USB connector of the keyboard.

*This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM- 1EX is required before the unit will operate normally.

3.From the CD-ROM, drag the Driver E (Mac OS 9) - OMS Setting folder into the Opcode - OMS Applications folder on the hard disk of your Macintosh to copy it there.

4.In the Opcode - OMS Applications folder where you installed OMS, double-click OMS Setup to start it up.

5.If a dialog box like the one shown here appears, click [Turn It Off]. A confirmation dialog box will then appear, so click [OK].

*We recommend that you turn off AppleTalk, by selecting Chooser from the Apple menu.

28