Mac OS 9 users
■Installing the UM-1 driver
Use either OMS or FreeMIDI as the MIDI driver.
The included UM-1 driver is an add-on module for using the UM-1EX with OMS or FreeMIDI. OMS can be found in the OMS 2.3.8 E folder within the OMS (Mac OS 9) folder of the CD-ROM. If you would like to know more about OMS, refer to OMS_2.3_Mac.pdf which can be found in the same folder.
*Either OMS or FreeMIDI must be installed in your Macintosh, as appropriate for the sequencer software you are using.
*If you install OMS after installing the UM-1 driver, you must install the UM-1 driver once again.
If a UM-1EX is already connected to your Macintosh when you install the driver, a message like the following will appear when the Macintosh is started up. Perform the steps described below as appropriate for the message that is displayed.
If the screen indicates:
“Software needed for the USB device “UM-1” is not available. Would you like to look for the software on the Internet?”➔ click [Cancel].
1.With the UM-1EX left unconnected, start up Macintosh
* Disconnect all USB cables other than those for your keyboard and mouse, and restart your Macintosh.
2.Exit all currently running software (applications).
3.Prepare the CD-ROM. Insert the CD-ROM into the CD-ROM drive of your Macintosh.
4.Double-click the UM-1Driver-E Installer icon (found in the Driver E (Mac OS 9) folder of the CD- ROM) to start up the installer.
