Before you begin
2.DC in connector
Connect the power cable (DC) from the AC adaptor to this connector.
3.Power cable hook
Use this hook to retain the power cable so that it will not be accidentally unplugged.
4.MIDI OUT connector (MIDI OUT)
MIDI messages input from an external device are output without change
5.MIDI IN connector (MIDI IN)
Use this connector to input control signals sent from an external device to the
6.
7.
Front Panel
8.Video (composite) input jacks (INPUT)
These jacks input video (composite) signals. If both video (composite) and
9.Preview select buttons (PREVIEW OUT SELECT) (see p. 20)
These buttons select the image that will be output to the preview monitor. You can select one of the input signals of channels 1 through 4, or the mixed output signal.
10.Preview output jack (PREVIEW OUT)
This jack outputs the preview monitor signal. Simultaneously, MIDI and effect parameters are also output to the preview monitor.
11.Video (composite) output jacks (OUTPUT)
These jacks output video (composite) signals. In conjunction with the
12.Parameter setting buttons
These buttons are used to set various parameters for each button. The parameters are displayed on the TV monitor connected to the preview output jack.
13.BPM indicator (see p. 39)
This displays the current BPM (Beats Per Minute) setting. You can turn the dial below to change the displayed setting.
14.Tap button (TAP) (see p. 39)
This button is used to control BPM. The speed at which this button is tapped affects the BPM setting.
14
