When circuit board installation is complete, double-check your work.

(French)

Quand l’installation de la carte de circuits imprimés est terminée, revérifiez si tout est bien installé.

*In some cases, depending on the environment in which the unit is installed, the surface of the panel may sometimes feel rough and grainy. This is due to an infini- tesimal electrical charge, which is absolutely harmless. However, if you are concerned about this, connect the ground terminal (see figure on p.16) with an external ground. When the unit is grounded, a slight noise may appear, depending on the particulars of your installation. If you are unsure of the connection method, contact the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.

Unsuitable places for connection

-Water pipes (may result in shock or electrocution)

-Gas pipes (may result in fire or explosion)

-Telephone-line ground or lightning rod (may be dangerous in the event of lightning)

About turning the power on

Once the connections have been completed (p. 19), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to other devices.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

About specifications

*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

Other important notes

The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer software), so what you actually see in the display may not always match what appears in the manual.

• Security Slot ( ) http://www.kensington.com/

This product is compatible with regular NTSC or PAL video signal. In case irregular signal is input, it may obstruct stabile operation of this product.

It is possible on this product to create video sequence with extremely quick switching or ON/OFF of effects. Depending on your physical conditions, such video sequence may cause medical problem like headache etc. It is prohibited to create video sequence that may cause such problem. Roland or Edirol is not responsible to any medical problem of yourselves or audiences/spectators caused by such video sequence.

6

Page 6
Image 6
Edirol V-4 owner manual About turning the power on, About specifications, Other important notes