Manuals / Pentax / Cell Phone / Carrying Case

Pentax Specifications, INSTRUMENT PLP-601R / PLP-602R, DETECTOR LS6, ± 10” PLP-601/PLP-601R

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 39

6. Specifications

INSTRUMENT PLP-601R / PLP-602R

Accuracy of reference beam:	± 10” (PLP-601/PLP-601R)
	± 12” (PLP-602/PLP-602R)
Measuring range:	Radius 1~200m (PLP-601/PLP-601R)
	Radius 1~120m (PLP-602/PLP-602R)
Automatic self-leveling range:	± 10% (± 5.7°)
Light source:	Visible Laser Diode (635nm Max 1.0mW)
Rotation speed:	300rpm / 600rpm (can be switched)
Operation power supply:	4 x D type batteries (PLP-601/ PLP-602)
	Rechargeable Ni-MH battery (PLP-601R/ PLP-602R)
Operation time:	24 hours on manganese battery (PLP-601/PLP-602)
	48 hours on alkaline battery (PLP-601/PLP-602)
	18 hours on Rechargeable Ni-MH battery (PLP-601R/PLP602R)
Charging time:	2 hours (PLP-601R/ PLP-602R)
Waterproof:	IPX6 Watertight type
Working temperature range:	-20°C ~+50°C (-4°F ~ +122°F)
Tripod attaching screw:	JIS/B type (5/8” x 11 thread)
Dimensions:	170w x 170D x 225H mm
Weight:	2.5kg (w/battery)

DETECTOR LS6

Detection Accuracy:	HIGH ± 1mm LOW ± 2.5mm
Beam reception indicator:	Liquid crystal display / buzzer
Sensitivity of vial:	30’ / 2mm
Power supply voltage:	DC9V battery(6F22 or 6LF22)
Operation time:	Approx 40 hours on alkaline battery (6LF22)
Auto power off:	Power supply: Approx.10 min.
Illumination:	Approx.1 min
Dimensions:	140w x 68H x 25L mm / 200g

39

Image 39

Pentax Specifications, INSTRUMENT PLP-601R / PLP-602R, DETECTOR LS6, ± 10” PLP-601/PLP-601R, ± 12” PLP-602/PLP-602R

Contents

Instruction Manual Total Construction SolutionsInstruction ManualPage Distinctive Displays Safety Precautions must be followedLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page Specifications CONTENTSafety Precautions Precautions Maintenance and adjustment1. For proper use of the instrument 1.1 Standard configurationTop handle 1.2 DescriptionBattery cap Center markLCD Display Buzzer SwitchAccuracy Switch Power Switch1.3 Unpacking Taking the instrument out of the carrying casePutting the instrument into the carrying case Battery insertion for the instrument 1.4 Battery insertionBattery insertion for the detector LS6 Detector 2.2 Role of keys 1 Power supply key2. Display and Keypad 2.1 KeypadRemaining battery display lamp 2 Battery check key3 Auto/manual change key From 300 to 600 rpm 4 Switching the rotation speed2.3 Warning display MANUAL MODEOFF LEVEL BATTERY CHECKPOWER ON OFF Arranging the tripod 1.1 Setting up the tripodSelection of the place to set up the tripod 3. Preparation for measurementSetting up the tripod 3.2 Setting up the instrument Mounting on the tripodInstrument Tripod head Center screw Installing the rod adapter LA6 LS6 detector 3.3 Arranging the detectorRod Adapter Fixing screw Detector 4. Measurement 4.1 Operating the instrumentStarting the operation 4.2 Operating the detector LS6 Power switchSelecting the reference level detecting accuracy High accuracy detectionLow accuracy detection Illuminating the display ON or OFF of the beam reception buzzerDetecting the reference level Direct marking Plain rod markingPlain rod marking Staff Index Rod Adapter Reading the staffStains on the glass surface 5. Maintenance5.1 Maintenance after use Stains on the main bodyHandling the battery Check 5.2 Check and adjustment of the datum point8 If more than ± 5 mm, proceed to the following Adjustment procedure PLP-601 / PLP-602 / PLP-601R / PLP-602R 5.3 TroubleshootingContent Manual mode display lampDisplay ContentDetector LS6 Rotor300rpm / 600rpm can be switched 6. SpecificationsINSTRUMENT PLP-601R / PLP-602R DETECTOR LS67. Notice to the user of this product 1 Specifications of Laser RadiationPage Page Page Total Surveying Solutions Printed in BelgiumJapan Surveying Instruments Manufacturers’ Association