Manuals / Pentax / Cell Phone / Carrying Case

Pentax PLP-602R, PLP-601R instruction manual Handling the battery

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 34

[Handling the battery]

If the instrument is not to be used for a long time, be sure to remove the batteries from the instrument and the detector and store them.

leakage

NOTE:

•Be sure not to use chemicals such as benzine, thinner or gasoline.

•Be careful not to scratch the glass surface.

•Leaving the batteries in the instrument for extended period may cause power consumption even if it is not in use.

•If used battery is left in the battery holder, the instrument of the detector may be damaged by the battery fluid leakage.

34

Image 34

Pentax PLP-602R, PLP-601R instruction manual Handling the battery

Contents

Manual Total Construction SolutionsInstruction Instruction ManualPage Safety Precautions must be followed Distinctive DisplaysLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page Maintenance and adjustment CONTENTSafety Precautions Precautions Specifications1.1 Standard configuration 1. For proper use of the instrumentCenter mark 1.2 DescriptionBattery cap Top handlePower Switch Buzzer SwitchAccuracy Switch LCD DisplayTaking the instrument out of the carrying case 1.3 UnpackingPutting the instrument into the carrying case 1.4 Battery insertion Battery insertion for the instrumentBattery insertion for the detector LS6 Detector 2.1 Keypad 1 Power supply key2. Display and Keypad 2.2 Role of keys2 Battery check key Remaining battery display lamp3 Auto/manual change key 4 Switching the rotation speed From 300 to 600 rpmMANUAL MODE 2.3 Warning displayOFF LEVEL BATTERY CHECKPOWER ON OFF 3. Preparation for measurement 1.1 Setting up the tripodSelection of the place to set up the tripod Arranging the tripodSetting up the tripod Mounting on the tripod 3.2 Setting up the instrumentInstrument Tripod head Center screw 3.3 Arranging the detector Installing the rod adapter LA6 LS6 detectorRod Adapter Fixing screw Detector 4.1 Operating the instrument 4. MeasurementStarting the operation Power switch 4.2 Operating the detector LS6High accuracy detection Selecting the reference level detecting accuracyLow accuracy detection ON or OFF of the beam reception buzzer Illuminating the displayDetecting the reference level Plain rod marking Direct markingPlain rod marking Reading the staff Staff Index Rod AdapterStains on the main body 5. Maintenance5.1 Maintenance after use Stains on the glass surfaceHandling the battery 5.2 Check and adjustment of the datum point Check8 If more than ± 5 mm, proceed to the following Adjustment procedure Manual mode display lamp 5.3 TroubleshootingContent PLP-601 / PLP-602 / PLP-601R / PLP-602RRotor ContentDetector LS6 DisplayDETECTOR LS6 6. SpecificationsINSTRUMENT PLP-601R / PLP-602R 300rpm / 600rpm can be switched1 Specifications of Laser Radiation 7. Notice to the user of this productPage Page Page Printed in Belgium Total Surveying SolutionsJapan Surveying Instruments Manufacturers’ Association