Manuals / Pentax / Cell Phone / Carrying Case

Pentax PLP-602R, PLP-601R If more than ± 5 mm, proceed to the following Adjustment procedure

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 36

8If more than ± 5 mm, proceed to the following (Adjustment) procedure.

6Read the target plates on the walls (A,B) to detect the reference points.

7If the readings of the target plates differ less than ± 5 mm, the instrument needs not to be adjusted.

8If more than ± 5 mm, proceed to the following (Adjustment) procedure.

Wall A

Appr. 20m	Appr. 20m
Target
Detector
X side in 1	X side in 5	Wall B

36

Image 36

Pentax PLP-602R, PLP-601R instruction manual If more than ± 5 mm, proceed to the following Adjustment procedure

Contents

Total Construction Solutions InstructionManual Instruction ManualPage Safety Precautions must be followed Distinctive DisplaysLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page CONTENT Safety Precautions PrecautionsMaintenance and adjustment Specifications1.1 Standard configuration 1. For proper use of the instrument1.2 Description Battery capCenter mark Top handleBuzzer Switch Accuracy SwitchPower Switch LCD Display1.3 Unpacking Taking the instrument out of the carrying casePutting the instrument into the carrying case 1.4 Battery insertion Battery insertion for the instrumentBattery insertion for the detector LS6 Detector 1 Power supply key 2. Display and Keypad2.1 Keypad 2.2 Role of keys2 Battery check key Remaining battery display lamp3 Auto/manual change key 4 Switching the rotation speed From 300 to 600 rpm2.3 Warning display MANUAL MODEOFF LEVEL BATTERY CHECKPOWER ON OFF 1.1 Setting up the tripod Selection of the place to set up the tripod3. Preparation for measurement Arranging the tripodSetting up the tripod 3.2 Setting up the instrument Mounting on the tripodInstrument Tripod head Center screw Installing the rod adapter LA6 LS6 detector 3.3 Arranging the detectorRod Adapter Fixing screw Detector 4. Measurement 4.1 Operating the instrumentStarting the operation Power switch 4.2 Operating the detector LS6Selecting the reference level detecting accuracy High accuracy detectionLow accuracy detection ON or OFF of the beam reception buzzer Illuminating the displayDetecting the reference level Direct marking Plain rod markingPlain rod marking Reading the staff Staff Index Rod Adapter5. Maintenance 5.1 Maintenance after useStains on the main body Stains on the glass surfaceHandling the battery 5.2 Check and adjustment of the datum point Check8 If more than ± 5 mm, proceed to the following Adjustment procedure 5.3 Troubleshooting ContentManual mode display lamp PLP-601 / PLP-602 / PLP-601R / PLP-602RContent Detector LS6Rotor Display6. Specifications INSTRUMENT PLP-601R / PLP-602RDETECTOR LS6 300rpm / 600rpm can be switched1 Specifications of Laser Radiation 7. Notice to the user of this productPage Page Page Total Surveying Solutions Printed in BelgiumJapan Surveying Instruments Manufacturers’ Association