Manuals / Pentax / Cell Phone / Carrying Case

Pentax PLP-601R, PLP-602R Arranging the detector, Installing the rod adapter LA6 LS6 detector

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 25

3.3 Arranging the detector

3.3 Arranging the detector

[Installing the rod adapter LA6] LS6 detector

1Mount the instrument on the rod adapter so that the guide pin of the rod adapter is inserted into the guide hole in the back of the detector.

2Tighten the attaching screw of the rod adapter into the detector.

Rod Adapter

Fixing screw

Detector

NOTE:

•The rod adapter is to be used when the detector is used together with a staff or plain rod.

25

Image 25

Pentax PLP-601R Arranging the detector, Installing the rod adapter LA6 LS6 detector, Rod Adapter Fixing screw Detector

Contents

Instruction Total Construction SolutionsManual Instruction ManualPage Distinctive Displays Safety Precautions must be followedLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page Safety Precautions Precautions CONTENTMaintenance and adjustment Specifications1. For proper use of the instrument 1.1 Standard configurationBattery cap 1.2 DescriptionCenter mark Top handleAccuracy Switch Buzzer SwitchPower Switch LCD DisplayTaking the instrument out of the carrying case 1.3 UnpackingPutting the instrument into the carrying case Battery insertion for the instrument 1.4 Battery insertionBattery insertion for the detector LS6 Detector 2. Display and Keypad 1 Power supply key2.1 Keypad 2.2 Role of keysRemaining battery display lamp 2 Battery check key3 Auto/manual change key From 300 to 600 rpm 4 Switching the rotation speedMANUAL MODE 2.3 Warning displayOFF LEVEL BATTERY CHECKPOWER ON OFF Selection of the place to set up the tripod 1.1 Setting up the tripod3. Preparation for measurement Arranging the tripodSetting up the tripod Mounting on the tripod 3.2 Setting up the instrumentInstrument Tripod head Center screw 3.3 Arranging the detector Installing the rod adapter LA6 LS6 detectorRod Adapter Fixing screw Detector 4.1 Operating the instrument 4. MeasurementStarting the operation 4.2 Operating the detector LS6 Power switchHigh accuracy detection Selecting the reference level detecting accuracyLow accuracy detection Illuminating the display ON or OFF of the beam reception buzzerDetecting the reference level Plain rod marking Direct markingPlain rod marking Staff Index Rod Adapter Reading the staff5.1 Maintenance after use 5. MaintenanceStains on the main body Stains on the glass surfaceHandling the battery Check 5.2 Check and adjustment of the datum point8 If more than ± 5 mm, proceed to the following Adjustment procedure Content 5.3 TroubleshootingManual mode display lamp PLP-601 / PLP-602 / PLP-601R / PLP-602RDetector LS6 ContentRotor DisplayINSTRUMENT PLP-601R / PLP-602R 6. SpecificationsDETECTOR LS6 300rpm / 600rpm can be switched7. Notice to the user of this product 1 Specifications of Laser RadiationPage Page Page Printed in Belgium Total Surveying SolutionsJapan Surveying Instruments Manufacturers’ Association