Manuals / Pentax / Cell Phone / Carrying Case

Pentax PLP-602R, PLP-601R instruction manual Reading the staff, Staff Index Rod Adapter

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 32

[Reading the staff]

[Reading the staff]

After the reference level has been detected, read the staff, using the index on the rod adapter.

Staff

Index

Rod Adapter

NOTE:

•When detecting the reference level, slightly loosen the fixing screw for the rod adapter and move the detector up and down along the staff.

32

Image 32

Pentax PLP-602R, PLP-601R instruction manual Reading the staff, Staff Index Rod Adapter

Contents

Total Construction Solutions InstructionManual Instruction ManualPage Safety Precautions must be followed Distinctive DisplaysLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page CONTENT Safety Precautions PrecautionsMaintenance and adjustment Specifications1.1 Standard configuration 1. For proper use of the instrument1.2 Description Battery capCenter mark Top handleBuzzer Switch Accuracy SwitchPower Switch LCD DisplayPutting the instrument into the carrying case 1.3 UnpackingTaking the instrument out of the carrying case 1.4 Battery insertion Battery insertion for the instrumentBattery insertion for the detector LS6 Detector 1 Power supply key 2. Display and Keypad2.1 Keypad 2.2 Role of keys2 Battery check key Remaining battery display lamp3 Auto/manual change key 4 Switching the rotation speed From 300 to 600 rpmMANUAL MODE 2.3 Warning displayOFF LEVEL BATTERY CHECKPOWER ON OFF 1.1 Setting up the tripod Selection of the place to set up the tripod3. Preparation for measurement Arranging the tripodSetting up the tripod Instrument Tripod head Center screw 3.2 Setting up the instrumentMounting on the tripod Rod Adapter Fixing screw Detector Installing the rod adapter LA6 LS6 detector3.3 Arranging the detector Starting the operation 4. Measurement4.1 Operating the instrument Power switch 4.2 Operating the detector LS6Low accuracy detection Selecting the reference level detecting accuracyHigh accuracy detection ON or OFF of the beam reception buzzer Illuminating the displayDetecting the reference level Plain rod marking Direct markingPlain rod marking Reading the staff Staff Index Rod Adapter5. Maintenance 5.1 Maintenance after useStains on the main body Stains on the glass surfaceHandling the battery 5.2 Check and adjustment of the datum point Check8 If more than ± 5 mm, proceed to the following Adjustment procedure 5.3 Troubleshooting ContentPLP-601 / PLP-602 / PLP-601R / PLP-602R RotorContent Detector LS6Rotor Display6. Specifications INSTRUMENT PLP-601R / PLP-602RDETECTOR LS6 300rpm / 600rpm can be switched1 Specifications of Laser Radiation 7. Notice to the user of this productPage Page Page Japan Surveying Instruments Manufacturers’ Association Total Surveying SolutionsPrinted in Belgium