Pentax PLP-602R, PLP-601R instruction manual Direct marking, Plain rod marking

[Direct marking]

After the reference level has been detected, mark a line along the detector’s index, or its top or bottom end.

6

[Plain rod marking]

After the reference level has been detected, mark a line along the plain rod’s top or bottom end.

NOTE:

•If a line was marked along the detector’s top or bottom end, be sure to make measurement compensation as described on the back of the detector.

•The detector should previously be positioned correctly on the plain rod according to the reference mark.

[Plain rod marking]

After the reference level has been detected, mark a line along the plain rod’s top or bottom end.

31