Manuals / Pentax / Cell Phone / Carrying Case

Pentax PLP-602R, PLP-601R instruction manual Battery insertion for the instrument

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 15

1.4 Battery insertion

1.4 Battery insertion

Battery insertion for the instrument

1Turn the detaching knob for battery cap counterclockwise and remove the cap from the instrument.

2Insert 4 pcs D type batteries into the battery box according to its

(+) and (-) marks. (PLP-601 / PLP-602)

3While holding the instrument with one hand, push the battery cap into the battery box and attach it by turning the knob clockwise.

15

Image 15

Pentax PLP-602R, PLP-601R instruction manual Battery insertion for the instrument

Contents

Instruction Manual Total Construction SolutionsInstruction ManualPage Distinctive Displays Safety Precautions must be followedLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page Specifications CONTENTSafety Precautions Precautions Maintenance and adjustment1. For proper use of the instrument 1.1 Standard configurationTop handle 1.2 DescriptionBattery cap Center markLCD Display Buzzer SwitchAccuracy Switch Power Switch1.3 Unpacking Taking the instrument out of the carrying casePutting the instrument into the carrying case Battery insertion for the instrument 1.4 Battery insertionBattery insertion for the detector LS6 Detector 2.2 Role of keys 1 Power supply key2. Display and Keypad 2.1 KeypadRemaining battery display lamp 2 Battery check key3 Auto/manual change key From 300 to 600 rpm 4 Switching the rotation speed2.3 Warning display MANUAL MODEOFF LEVEL BATTERY CHECKPOWER ON OFF Arranging the tripod 1.1 Setting up the tripodSelection of the place to set up the tripod 3. Preparation for measurementSetting up the tripod 3.2 Setting up the instrument Mounting on the tripodInstrument Tripod head Center screw Installing the rod adapter LA6 LS6 detector 3.3 Arranging the detectorRod Adapter Fixing screw Detector 4. Measurement 4.1 Operating the instrumentStarting the operation 4.2 Operating the detector LS6 Power switchSelecting the reference level detecting accuracy High accuracy detectionLow accuracy detection Illuminating the display ON or OFF of the beam reception buzzerDetecting the reference level Direct marking Plain rod markingPlain rod marking Staff Index Rod Adapter Reading the staffStains on the glass surface 5. Maintenance5.1 Maintenance after use Stains on the main bodyHandling the battery Check 5.2 Check and adjustment of the datum point8 If more than ± 5 mm, proceed to the following Adjustment procedure PLP-601 / PLP-602 / PLP-601R / PLP-602R 5.3 TroubleshootingContent Manual mode display lampDisplay ContentDetector LS6 Rotor300rpm / 600rpm can be switched 6. SpecificationsINSTRUMENT PLP-601R / PLP-602R DETECTOR LS67. Notice to the user of this product 1 Specifications of Laser RadiationPage Page Page Total Surveying Solutions Printed in BelgiumJapan Surveying Instruments Manufacturers’ Association