Manuals / Pentax / Cell Phone / Carrying Case

Pentax PLP-601R Maintenance after use, Stains on the main body, Stains on the glass surface

Models: PLP-602R

1 44

Download 44 pages 47.25 Kb

Page 33

5. Maintenance

5. Maintenance

5.1 Maintenance after use

[Stains on the main body]

1Brush dust off and wipe off moisture with tissue paper.

2Clean off any stains with a soft, dry cloth.

3Excessive stains should be removed with a soft cloth soaked in a water diluted neutral detergent and squeezed dry.

Do not use benzine, thinner, gasoline or chemicals.

[Stains on the glass surface]

Brush dust off.

Gently wipe off stains with a silicone cloth or a cleaning cloth for eye glass lenses.

Excessive stains should be wiped off with soft cotton cloth impregnated with a cleaning liquid for eye glass lenses.

33

Image 33

Pentax PLP-601R, PLP-602R instruction manual Maintenance after use, Stains on the main body, Stains on the glass surface

Contents

Instruction Total Construction SolutionsManual Instruction ManualPage Distinctive Displays Safety Precautions must be followedLaser beam Equivalent to class 2 Laser level Precautions Page in or near the airport etc. and so correct measurement is sometimes not performed near these places. In these cases, please measure again after stopping or cutting these modulated light or wave etc Page Page Safety Precautions Precautions CONTENTMaintenance and adjustment Specifications1. For proper use of the instrument 1.1 Standard configurationBattery cap 1.2 DescriptionCenter mark Top handleAccuracy Switch Buzzer SwitchPower Switch LCD Display1.3 Unpacking Taking the instrument out of the carrying casePutting the instrument into the carrying case Battery insertion for the instrument 1.4 Battery insertionBattery insertion for the detector LS6 Detector 2. Display and Keypad 1 Power supply key2.1 Keypad 2.2 Role of keysRemaining battery display lamp 2 Battery check key3 Auto/manual change key From 300 to 600 rpm 4 Switching the rotation speed2.3 Warning display OFF LEVEL BATTERY CHECKPOWER ON OFFMANUAL MODE Selection of the place to set up the tripod 1.1 Setting up the tripod3. Preparation for measurement Arranging the tripodSetting up the tripod 3.2 Setting up the instrument Mounting on the tripodInstrument Tripod head Center screw Installing the rod adapter LA6 LS6 detector 3.3 Arranging the detectorRod Adapter Fixing screw Detector 4. Measurement 4.1 Operating the instrumentStarting the operation 4.2 Operating the detector LS6 Power switchSelecting the reference level detecting accuracy High accuracy detectionLow accuracy detection Illuminating the display ON or OFF of the beam reception buzzerDetecting the reference level Direct marking Plain rod markingPlain rod marking Staff Index Rod Adapter Reading the staff5.1 Maintenance after use 5. MaintenanceStains on the main body Stains on the glass surfaceHandling the battery Check 5.2 Check and adjustment of the datum point8 If more than ± 5 mm, proceed to the following Adjustment procedure Content 5.3 TroubleshootingPLP-601 / PLP-602 / PLP-601R / PLP-602R RotorDetector LS6 ContentRotor DisplayINSTRUMENT PLP-601R / PLP-602R 6. SpecificationsDETECTOR LS6 300rpm / 600rpm can be switched7. Notice to the user of this product 1 Specifications of Laser RadiationPage Page Page Total Surveying Solutions Printed in BelgiumJapan Surveying Instruments Manufacturers’ Association