Edirol V-4 owner manual Midi implementation

MIDI implementation

●Program Change

Status2nd byte

----------------------------------------

CnHppH

pp= program number:00H - 7FH (prog.1 - prog.128)

*When you select channel A or channel B inputs, make memory settings, or specify how sub-channels are mixed in Presentation mode, these messages will be transmitted in conjunction with Bank Select messages. For details, refer to the section on Bank Select.

●Channel Pressure

Status2nd byte

----------------------------------------

DnHvvH

*Just as for Control Changes, the messages assigned in MIDI Setup will be transmitted when you operate the panel. For the factory settings, refer to “Settings Transmitted/ Received Using MIDI” (p. 95).

●Pitch Bend Change

Status2nd byte3rd byte

--------------------------------------------------------------------

EnH llH mmH

mm, ll= pitch bend value:00 00H - 40 00H - 7F 7FH (-8192 - 0 -+8191)

*Just as for Control Changes, the messages assigned in MIDI Setup will be transmitted when you operate the panel. For the factory settings, refer to “Settings Transmitted/ Received Using MIDI” (p. 95).

92