Edirol V-4 owner manual About the display on preview monitor

Checking the inputs and outputs

3.Switch the output channel

Try switching the channel that is being output to the V-4’s preview monitor. Press the preview select buttons (1 through 4 and OUTPUT) one after another, and verify that the image being output to your TV monitor changes accordingly.

About the display on preview monitor

Information about settings of V-4 is displayed to the Preview Monitor as below.

Selection of preview output

Current position and

Settings ofsetting of Output Fader

BPM and TAP

Settings of	Settings of
channel A effects	channel B effects
Selection of
Transition Effect	Channel selection
Setting of	of video fader and
	input selection
Transformers

•If name of the effect is highlighted, this is the effect selected

•If * mark is displayed after effect name, the effect parameter can be changed with the control dial.

•If ball mark is displayed aside highlighted effect names, it means the effect parameter can be changed with the control dial.

You can add or reduce the information displayed on the preview monitor by changing the settings of the V-4 as described on P. 75 or later.

•[**Preset**] is displayed when position 1 of Memory Dial is selected. The 1st setting is fixed to the factory preset and cannot be changed.

•[*Protect On*] is displayed when Memory Protection is enabled. If this message appears, settings cannot be changed.

21