Edirol V-4 owner manual Factory Setting of V-LINK

MIDI Implementation

●A ch effect 4

This specifies effect 4 on/off and the parameter for channel A in Normal mode or the base channel in Presentation mode.

With the factory settings this is unassigned.

Values are 0, 1--127, corresponding to OFF, ON:0--Max.

●B ch effect 1

This specifies effect 1 on/off and the parameter for channel B in Normal mode. With the factory settings this is unassigned.

Values are 0, 1--127, corresponding to OFF, ON:0--Max.

●B ch effect 2

This specifies effect 2 on/off and the parameter for channel B in Normal mode. With the factory settings this is unassigned.

Values are 0, 1--127, corresponding to OFF, ON:0--Max.

●B ch effect 3

This specifies effect 3 on/off and the parameter for channel B in Normal mode. With the factory settings this is unassigned.

Values are 0, 1--127, corresponding to OFF, ON:0--Max.

●B ch effect 4

This specifies effect 4 on/off and the parameter for channel B in Normal mode. With the factory settings this is unassigned.

Values are 0, 1--127, corresponding to OFF, ON:0--Max.

●Transition Select

Selects the type of transition.

With the factory settings this is unassigned.

Values are 0-2, corresponding to Transition 1, Transition 2 and Transition 3.

●Transformer A

Turns channel A TRANSFORMER on/off.

With the factory settings this is unassigned.

Values are 0-63 and 64-127, corresponding to OFF and ON.

●Transformer B

Turns channel B TRANSFORMER on/off.

With the factory settings this is unassigned.

Values are 0--63 and 64--127, corresponding to OFF and ON.

●Output Fade

Controls OUTPUT FADE.

With the factory settings this is unassigned.

Values are 0 - 64 - 127, corresponding to Black - Center - White.

●BPM Sync

Switches BPM SYNC on/off.

With the factory settings this is unassigned.

Values are 0-63 and 64-127, corresponding to OFF and ON.

●Video Fader

Controls the VIDEO FADER.

With the factory settings this is assigned to CC#11 (Expression).

Values are 0-127, corresponding to A (base)-B (sub).

■Factory Setting of V-LINK

The factory setting of V-LINK (receipt of V-LINK ON message only) is as follows.

+————————————————————————————————————————————————————————————————+

Parameter Assign Value

+————————————————————————————————————————————————————————————————+

V—4 Mode	—	Presentation Mode
Note Mode	—	OFF
Rx Channel	—	1
Tx Channel	—	1
Input Select	—	Ach : 1
		Bch : 2
Memory Select	—	1
Transition TimeCC#5(Portament Time		0.0 sec
A ch Effect 1	OFF	OFF
A ch Effect 2	OFF	OFF
A ch Effect 3	OFF	OFF
A ch Effect 4	OFF	OFF
B ch Effect 1	OFF	OFF
B ch Effect 2	OFF	OFF
B ch Effect 3	OFF	OFF
B ch Effect 4	OFF	OFF
Transition
Select	OFF	1
Transformer A	OFF	OFF
Transformer B	OFF	OFF
Output Fade	OFF	Center
BPM Sync	OFF	OFF
Video Fader	CC#11(Expression)	A 100%

+————————————————————————————————————————————————————————————————+

*When V-LINK is off, V-LINK message will be ignored.

*The changes of setting done while V-LINK is on will not be saved.

*When V-LINK is turned off, the setting before V-LINK turned on will be recalled.

96