CALL SEQUENCES
•Called party does not hear the mobile.
9.Press the PTT on the mobile.
•CIM changes to Duplex Task “6”.
•Called party hears the mobile voice.
10.Press the DTMF “#” key for longer than 1 second and release the PTT.
•CIM changes to End Call Task “E”.
•Mobile hears the “End Call Tone”.
•CIM changes to Idle Task “2”.
•Mobile returns to idle and is silent.
•TIM changes to End Call Task “C”.
•TIM disconnects the telephone line.
•TIM changes to Idle Task “2”.
B.9 LANDSIDE (TIM) ORIGINATE TO MOBILE WITHIN SWITCH USING A DID LINE
1.Dial the desired number for a mobile within the Switch.
•The associated TIM changes from Idle Task “2” to Incoming Seize Task “3”.
•CIM changes from Idle Task “2” to Transmit Task “3”.
•TIM changes to Incoming Channel Conversation Task “5”.
•Landside party and mobile hear “Ringing Tone”.
2.Press the PTT on the mobile.
•“Ringing Tone” is turned off.
•CIM changes to Duplex Task “6”.
•Landside party hears the mobile voice.
3.Release the PTT on the mobile.
•Landside party hears silence.
•CIM changes to Transmit Task “3”.
•Mobile hears the landside party.
4.The mobile disconnects by pressing the PTT and DTMF “#” key for 1 second.
5.The landside party disconnects by pressing the DTMF “#” key for 1 second.
•CIM changes to the End Call Task “E”.
•Mobile hears the “End Call Tone”.
•CIM changes to the Idle Task “2”.
•Mobile is silent.
•TIM changes to end Call Task “C”.
•Landside party hears “End Call Tone”.
•TIM disconnects the telephone line when land- side disconnects.
•TIM changes to Idle Task “2”.
B.10 LANDSIDE (TIM) ORIGINATE TO MOBILE WITHIN SWITCH USING A 2WY LINE
1.Dial the desired number for the 2WY line.
•The associated TIM changes from Idle Task “2” to Incoming Seize Task “3”.
•Landside party hears the proceed tone.
2.The landside party enters the
•CIM changes from Idle Task “2” to Transmit Task “3”.
•TIM changes to Incoming Channel Conversation Task “5”.
•Landside party and the mobile hear “Ringing Tone”.
3.Press the PTT on the mobile.
•“Ringing Tone” is turned off.
•CIM changes to Duplex Task “6”.
•Landside party hears the mobile voice.
4.Release the PTT on the mobile.
•Landside party hears silence.
•CIM changes to Transmit Task “3”.
•Mobile hears the landside party.
5.Press mobile's PTT and DTMF “#” key for 1 second or landside party presses the DTMF “#” key for 1 second.
•CIM changes to the End Call Task “E”.
•Mobile hears the “End Call Tone”.
•CIM changes to the Idle Task “2”.
•Mobile is silent.
•TIM changes to end Call Task “C”.
•TIM disconnects the telephone line.
•TIM changes to Idle Task “2”.