Sys Rcl | EFJohnson 7243 LTR-Net Portable UHF manual

CONTROLS AND DISPLAY

SYS (RCL)

Standard Mode

SYS - Selects the next higher system. SYS - Selects the next lower system. SYS (xx) - Directly selects specified system.

FCN RCL - Momentarily displays the revert (selected) system if it is not already being displayed.

Dial Mode

RCL - Scrolls through the numbers programmed in memory. FCN RCL (0-9) - Recalls the number stored in the specified

memory location.

FCN RCL - Recalls the last number dialed from memory. FCN RCL - Recalls the last number dialed.

GRP (CLR)

Standard Mode

The GRP key functions the same as “SYS” just described to change or display the selected group.

Dial Mode

CLR - Erases the last digit in the display.

FCN CLR - Erases the entire number in the display.

1(HOME) Standard Mode

FCN HOME - Selects the preprogrammed home system/group.

1 - Pressing this key with the PTT switch pressed transmits the “1”

digit.

Dial Mode

1 - Dials the “1” digit.

2(PHONE) Standard Mode

FCN PHONE - Selects the dial mode and a telephone group in the current system.

2 - Pressing this key with the PTT switch pressed transmits the “2” digit.

16

Image 15

EFJohnson 7243 LTR-Net Portable UHF manual Sys Rcl

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference Guide General Features Features Top Panel Controls Controls and Display Side Controls Display Busy UID Controls and Display FCN Scan Front Panel Keys SYS RCL Dial Standard Mode A/D Standard Mode SYS Basic Operation Power-Up SequenceSetting Volume Levels System/Group Display Mode System and Group Select Numeric Display Mode Transceiver Lock Keypad Disable Low Battery Indication Option SwitchesLTR-Net, LTR, and Conventional Operation Basic Operation General Features Call IndicatorBank Select Home System/Group Select Proceed Clear-To-Talk ToneReceive-Only Groups General Time-Out TimerStandard Group Calls Tone Select LTR-Net and LTR Operation Placing a Standard Group Call Receiving a Standard Group Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu Mode Introduction Menu Mode Menu Mode Flowchart Dial Mode Selecting Dial ModeIntroduction Dialing a Number Sending the NumberStoring Numbers in Memory Exiting Dial Mode Placing Calls Without Selecting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scanning LTR-NET and LTR Features Transmit InhibitPriority Calls Busy Queuing LTR-NET FeaturesLTR-Net Standard Calls LTR-Net Special Calls Roaming Standard Group Calls LTR FeaturesConventional Features Squelch Adjust Monitoring Before Transmitting Transmit Disable On Busy Monitor Mode Selected Call Guard Squelch Talk-Around Supervisory Tones Miscellaneous LTR-Net Special Call Tones Display Messages LTR Telephone Call Tones Miscellaneous Bank SEL Bank select Menu Mode Messages Alpha Numeric Rechargeable Battery Pack Miscellaneous Battery Charger Operation Charger Indicators Speaking Into MicrophoneOperation At Extended Range Transceiver Service IndexLicensing Busy 14 Call 13 Index 002-7200-600