Menu Mode Messages | EFJohnson 7243 LTR-Net Portable UHF manual

MISCELLANEOUS

OUT-LOCK - Indicates that the synthesizer is unlocked. Refer to “Transceiver Service” on page 61 for more information.

PROG ERR - Indicates an EEPROM read error. Refer to “Transceiver Service” on page 61 for more information.

SLEEPING - Indicates that the transceiver has been temporarily disabled by the system operator. It will be automatically enabled again when oper- ation can be resumed.

SQUELCH - Indicates that the conventional squelch adjust mode is selected (see page 48).

TIMEOUT - Indicates that the transmitter has been disabled by the Time-Out Timer (see page 27).

TX DISBL - Indicates that the transmitter has been disabled because the selected group is receive-only (see page 26).

TX INHIB - Indicates that the transmitter has been disabled by the Transmit Inhibit feature (see page 45).

Menu Mode Messages

The following messages are displayed in the menu mode that is

described starting on page 34. The enabled or “yes” condition is indicated by “ON”, and the disabled or “no” condition by “OFF”.

BACKLGHT - Backlight enable/disable

•ON or OFF

BANK SEL - Bank select

•Bank alpha tag

ROAMING - LTR-Net roaming on-off

•ON or OFF

56

Image 55

EFJohnson 7243 LTR-Net Portable UHF manual Menu Mode Messages, Bank SEL Bank select

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference Guide General Features Features Top Panel Controls Controls and Display Side Controls Display Busy UID Controls and Display FCN Scan Front Panel Keys SYS RCL Dial Standard Mode A/D Standard Mode SYS Basic Operation Power-Up SequenceSetting Volume Levels System/Group Display Mode System and Group Select Numeric Display Mode Transceiver Lock Keypad Disable Option Switches Low Battery IndicationLTR-Net, LTR, and Conventional Operation Basic Operation Call Indicator General FeaturesBank Select Proceed Clear-To-Talk Tone Home System/Group SelectReceive-Only Groups General Time-Out TimerStandard Group Calls Tone Select LTR-Net and LTR Operation Placing a Standard Group Call Receiving a Standard Group Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu Mode Introduction Menu Mode Menu Mode Flowchart Selecting Dial Mode Dial ModeIntroduction Sending the Number Dialing a NumberStoring Numbers in Memory Placing Calls Without Selecting Dial Mode Exiting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scanning Transmit Inhibit LTR-NET and LTR FeaturesPriority Calls Busy Queuing LTR-NET FeaturesLTR-Net Standard Calls LTR-Net Special Calls Roaming Standard Group Calls LTR FeaturesConventional Features Squelch Adjust Monitoring Before Transmitting Transmit Disable On Busy Monitor Mode Selected Call Guard Squelch Talk-Around Supervisory Tones Miscellaneous LTR-Net Special Call Tones Display Messages LTR Telephone Call Tones Miscellaneous Bank SEL Bank select Menu Mode Messages Alpha Numeric Rechargeable Battery Pack Miscellaneous Battery Charger Operation Speaking Into Microphone Charger IndicatorsOperation At Extended Range Index Transceiver ServiceLicensing Busy 14 Call 13 Index 002-7200-600