![](/images/new-backgrounds/1257718/25771879x1.webp)
SYSTEM AND GROUP SCANNING
System Scan List | Group Scan List |
S
G
System or Group | Group |
Scanning Selected | Scanning Occurring |
Scan Types
The type of scanning selected is determined by the menu mode SCN TYPE parameter (see page 35). If it is not selectable, the scan type is fixed by system operator programming. The available scan types are as follows.
SYSTEMS - Both system and group
GROUPS - Group scanning only
OFF - Both types disabled (scanning not selectable)
If the SCN TYPE menu parameter is disabled, the scan type is fixed by programming. The selected system and group can be changed while scanning using the SYS and GRP keys in the normal manner. Scanning resumes shortly after the change is made.
When a call is received in the scan mode, the display changes to the system and group of the call. Programming determines if this change is temporary or permanent, and if a response occurs on the system/group of the call or the selected system/group. Refer to “Transmitting In The Scan Mode” on page 43 for more information.
When system scanning with an
41