Menu Mode, Introduction | EFJohnson 7243 LTR-Net Portable UHF

OPTION SWITCHES AND MENU MODE

Option Switches

The push-button switch on the top panel (see page 11) and the switch immediately above and the switch immediately below the PTT switch on the side panel (see page 12) are programmable by your system operator. The functions which can be controlled by these switches are basically the functions that are selectable by the front panel keys plus monitor mode select (see “Option Switch” column of the preceding table). This provides a “quick select” for these functions. Some functions may be controlled by both the keypad and an option switch, and some or all option switches may be disabled.

Menu Mode

Introduction

The menu mode is selected by pressing FCN MENU. Functions which can be controlled by the menu mode are indicated by an entry in the “Menu Items” column of the preceding table. More information on each function can be found on the page indicated in this table. Parameters are not displayed in the menu mode if they are not used, in a fixed state, or controlled by only an option switch. Calls cannot be received or trans- mitted while the menu mode is selected.

Using Menu Mode

A flowchart of the menu mode is shown on the next page. Proceed as follows to select functions using the menu mode:

1.Select the menu mode by pressing FCN MENU. The first menu param- eter is then displayed.

2.To scroll through the available menu parameters, press the (scroll down) and (scroll up) keys. Then to display and change the selected option for a parameter, proceed as follows:

35

Image 34

EFJohnson 7243 LTR-Net Portable UHF manual Menu Mode, Introduction

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Quick Reference Guide Busy Features General Features Controls and Display Top Panel Controls Side Controls Busy UID Display Controls and Display Front Panel Keys FCN Scan SYS RCL Dial Standard Mode A/D Standard Mode SYS System/Group Display Mode Power-Up SequenceSetting Volume Levels Basic Operation Numeric Display Mode System and Group Select Keypad Disable Transceiver Lock Option Switches Low Battery IndicationLTR-Net, LTR, and Conventional Operation Basic Operation Call Indicator General FeaturesBank Select Proceed Clear-To-Talk Tone Home System/Group SelectReceive-Only Groups Tone Select Time-Out TimerStandard Group Calls General Placing a Standard Group Call LTR-Net and LTR Operation Conventional Operation Receiving a Standard Group Call Telephone Calls Placing Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Option Switches and Menu Mode Menu Mode and Option Switch Functions Menu Mode Introduction Menu Mode Flowchart Selecting Dial Mode Dial ModeIntroduction Sending the Number Dialing a NumberStoring Numbers in Memory Placing Calls Without Selecting Dial Mode Exiting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue Timers System and Group Scanning Transmit Inhibit LTR-NET and LTR FeaturesPriority Calls LTR-Net Special Calls LTR-NET FeaturesLTR-Net Standard Calls Busy Queuing Roaming Squelch Adjust LTR FeaturesConventional Features Standard Group Calls Monitoring Before Transmitting Monitor Mode Selected Transmit Disable On Busy Talk-Around Call Guard Squelch Miscellaneous Supervisory Tones LTR-Net Special Call Tones LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bank SEL Bank select Rechargeable Battery Pack Alpha Numeric Miscellaneous Battery Charger Operation Speaking Into Microphone Charger IndicatorsOperation At Extended Range Index Transceiver ServiceLicensing Busy 14 Call 13 Index 002-7200-600