Chapter 7 Menu description tables
90
7-5-6 WHITE BALANCE MODE
AWB B MEM
VAR
For selecting the allocation of the WHITE BAL
switch position and Bch.
MEM: The switch position and Bch are
allocated as memory values when
AWB is executed.
VAR: The color temperature of B can be set
to vary using the COLOR TEMP B
menu item.
COLOR TEMP B 3200K
:
5600K
For setting the color temperature when AWB
B has been set to VAR.
Item/
Data storage
Variable
range Remarks
FILTER INH ON
OFF
For selecting whether or not to keep the AWB
memory (Ach, Bch) data for each filter.
ON: The data is kept in the two Ach and Bch
memories for each filter used.
OFF: The data is kept for each filter.
SHOCKLESS AWB OFF
FAST
NORMAL
SLOW1
SLOW2
SLOW3
For selecting whether to set SHOCKLESS
AWB to ON (FAST/NORMAL/SLOW1-3) or
OFF.
The SHOCKLESS AWB function will work
only when MEM has been selected at the
AWB A item and AWB B item settings for the
A and B positions of the WHITE BAL switch,
and it ensures that no shocks will result when
the WHITE BAL switch is switched between
the PRST, A and B settings.
In addition, the switching time can be
selected.
AWB AREA 25%
50%
90%
For selecting the AWB detection area.
25%: An area near the screen center
equivalent to 25% of the screen is
detected.
50%: An area near the screen center
equivalent to 50% of the screen is
detected.
90%: An area equivalent to 90% of the
screen is detected.
AWB & ABB
OFFSET
ON
OFF
For selecting whether or not to reset the GAIN
and PED values on the ROP menu when
AWB or ABB is executed. When set to OFF,
GAIN will be reset when AWB is executed
and PEDESTAL will be reset when ABB is
executed.
ON: The values are not reset.
OFF: The values are reset.
COLOR TEMP PRE 3200K
:
5600K
For selecting the AWB PRE color
temperature.
AWB A MEM
VAR
For selecting the allocation of the WHITE BAL
switch position and Ach.
MEM: The switch position and Ach are
allocated as memory values when
AWB is executed.
VAR: The color temperature of A can be set
to vary using the COLOR TEMP A
menu item.
COLOR TEMP A 3200K
:
5600K
For setting the color temperature when AWB
A has been set to VAR.
7-5-7 USER SW GAIN
Item/
Data storage
Variable
range Remarks
S.GAIN
30 dB
2
O
For selecting whether or not to enable a
setting of 30 dB for SUPER GAIN.
2:The 30 dB setting is enabled.
O:The 30 dB setting is disabled.
36 dB 2
O
For selecting whether or not to enable a
setting of 36 dB for SUPER GAIN.
2:The 36 dB setting is enabled.
O:The 36 dB setting is disabled.
42 dB 2
O
For selecting whether or not to enable a
setting of 42 dB for SUPER GAIN.
2:The 42 dB setting is enabled.
O:The 42 dB setting is disabled.
48 dB 2
O
For selecting whether or not to enable a
setting of 48 dB for SUPER GAIN.
2:The 48 dB setting is enabled.
O:The 48 dB setting is disabled.
DS.GAIN
6 dB:(25P)
2
O
For selecting whether or not to enable a
setting increase of 6 dB (25P) for DS.GAIN.
2:The 6 dB setting increase is enabled.
O:The 6 dB setting increase is disabled.
12 dB:(12P) 2
O
For selecting whether or not to enable a
setting increase of 12 dB (12P) for DS.GAIN.
2:The 12 dB setting increase is enabled.
O:The 12 dB setting increase is disabled.
20 dB:(5P) 2
O
For selecting whether or not to enable a
setting increase of 20 dB (5P) for DS.GAIN.
2:The 20 dB setting increase is enabled.
O:The 20 dB setting increase is disabled.
The underlining in the variable range column indicates the setting in the preset mode.
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
CUFE
DS.GAIN
10 dB:(16P)
2
O
For selecting whether or not to enable a
setting increase of 10 dB (16P) for DS.GAIN.
2:The 10 dB setting increase is enabled.
O:The 10 dB setting increase is disabled.
CUFE
CUFE
15 dB:(8P) 2
O
For selecting whether or not to enable a
setting increase of 15 dB (8P) for DS.GAIN.
2:The 15 dB setting increase is enabled.
O:The 15 dB setting increase is disabled.
CUFE
CUFE