Panasonic AJ-HDX400E Iris override, ? Iris, f-value, @ Zoom display, Interval, pre-rec

Chapter 4 Adjustments and settings for recording

Display item	What is displayed		Status when display appears
> Iris override	++	When the iris override function is working, this indicates how much
display	+	compensation is provided.
	(No display)	++:	The aperture is opened by a full stop.
	–	+:	The aperture is opened by a half stop.
	– –	– –:	The aperture is closed by a full stop.
		–:	The aperture is closed by a half stop.
		No display: Reference status
? Iris, f-value	NC	This appears when the lens cable is not connected.
	OPEN	This appears when the lens aperture is open.
	F1.7 to F16	This indicates the aperture value (f-value) of the lens.
	CLOSE	This appears when the lens aperture is closed.
		<Note>
		These displays appear when using a lens equipped with an aperture
		value display function. They flash while the aperture is being changed
		for the iris override.
@ Zoom display	Z00 to Z99	This indicates the amount of zoom. Note that this item is not displayed
		even if the display setting is ON if the lens is not equipped with a zoom
		position return function.
A Interval, pre-rec	i (flashing)	This appears in the INTERVAL REC mode during the times when the
display		operation of the REC button is not acknowledged before the start of or
		at the end of recording.
	iREC (lighting)	This appears during an INTERVAL REC operation.
	iREC (flashing) ¢¢h¢¢m/¢¢s	This appears during INTERVAL REC standby to indicate the wait time
		until the next recording.
	P-REC (flashing) ¢s	This indicates the amount of time remaining until the end of the set PRE
		REC time during PRE REC operation.
B ID recording	ID	This appears when the setting to superimpose the ID onto the camera
display		image and record the image with the ID has been established.
C Battery type	AJ-BP490 to AC_ADPT	This indicates the type of battery selected on the menu. “AC_ADPT”
		appears when an AC adapter has been input.
D Remaining battery	¢¢.¢V	This indicates the remaining battery charge in 0.1V increments.
charge/voltage	¢¢¢%	This indicates the remaining digital battery charge in percent.
	EMP	This appears when the battery has no charge left.
	MAX	This appears when the battery has a full charge.
E Unit’s REC display	REC	This appears when the extender unit has been connected to indicate the
		unit’s recording status using characters. It lights during recording, and it
		flashes while the unit’s mode is transferring to recording or when a
		warning has been issued.
F Remaining tape	¢¢¢min	Under normal conditions, “¢¢¢min” lights, and this starts flashing while
		the tape is reaching the end.
	= END	When the tape has reached the end, “= END” lights.
	= INH	When recording has been inhibited, “= INH” lights.
G Total length of	¢¢¢min	This indicates the total length of the cassette tape.
cassette tape		(This appears during a mode check.)
H Super iris ON/	S	This appears when S.IRIS has been set to ON.
super black ON	B	This appears when S.BLK has been set to ON.
	SB	This appears when S.IRIS and S.BLK have been set to ON.

4

43