Dial Standard Mode | EFJohnson 7243 LTR-Net Portable UHF instruction

CONTROLS AND DISPLAY

Dial Mode

2 - Dials the “2” digit.

FCN PHONE - Exits the dial mode and sends the call termination code.

3(DIAL) Standard Mode

FCN DIAL - Selects the dial mode without changing the currently selected group.

3 - Pressing this key with the PTT switch pressed transmits the “3” digit.

Dial Mode

3 - Dials the “3” digit.

FCN DIAL - Exits the dial mode without sending the call termination code.

4(PAGE)

Standard Mode

FCN PAGE - The page function is currently not available.

4 - Pressing this key with the PTT switch pressed transmits the “4” digit.

Dial Mode

4 - Dials the “4” digit.

5(MENU) Standard Mode

FCN MENU - Selects the menu mode.

5 - Pressing this key with the PTT switch pressed transmits the “5” digit.

Dial Mode

5 - Dials the “5” digit.

6(SQL)

Standard Mode

FCN SQL - Selects the squelch adjust mode for conventional channels.

6 - Pressing this key with the PTT switch pressed transmits the “6” digit.

17

Image 16

EFJohnson 7243 LTR-Net Portable UHF manual Dial Standard Mode

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Quick Reference Guide Busy Features General Features Controls and Display Top Panel Controls Side Controls Busy UID Display Controls and Display Front Panel Keys FCN Scan SYS RCL Dial Standard Mode A/D Standard Mode SYS Power-Up Sequence Setting Volume LevelsSystem/Group Display Mode Basic Operation Numeric Display Mode System and Group Select Keypad Disable Transceiver Lock Option Switches Low Battery IndicationLTR-Net, LTR, and Conventional Operation Basic Operation Call Indicator General FeaturesBank Select Proceed Clear-To-Talk Tone Home System/Group SelectReceive-Only Groups Time-Out Timer Standard Group CallsTone Select General Placing a Standard Group Call LTR-Net and LTR Operation Conventional Operation Receiving a Standard Group Call Telephone Calls Placing Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Option Switches and Menu Mode Menu Mode and Option Switch Functions Menu Mode Introduction Menu Mode Flowchart Selecting Dial Mode Dial ModeIntroduction Sending the Number Dialing a NumberStoring Numbers in Memory Placing Calls Without Selecting Dial Mode Exiting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue Timers System and Group Scanning Transmit Inhibit LTR-NET and LTR FeaturesPriority Calls LTR-NET Features LTR-Net Standard CallsLTR-Net Special Calls Busy Queuing Roaming LTR Features Conventional FeaturesSquelch Adjust Standard Group Calls Monitoring Before Transmitting Monitor Mode Selected Transmit Disable On Busy Talk-Around Call Guard Squelch Miscellaneous Supervisory Tones LTR-Net Special Call Tones LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bank SEL Bank select Rechargeable Battery Pack Alpha Numeric Miscellaneous Battery Charger Operation Speaking Into Microphone Charger IndicatorsOperation At Extended Range Index Transceiver ServiceLicensing Busy 14 Call 13 Index 002-7200-600