Dialing a Number | EFJohnson 7243 LTR-Net Portable UHF specification

DIAL MODE

Dialing a Number

Enter the desired number by pressing the 0-9, #, and keys. Other dialing functions are as follows:

•Only the last 8 digits dialed are displayed. To momentarily display the upper 8 digits, press FCN .

•To erase the last digit, press the CLR key (hold it down to repeat). To erase the entire number, press FCN CLR.

•To enter a pause, press FCN (each pause equals one character).

Sending the Number

Briefly press the PTT switch to access the radio system. Then to send the number in the display, press FCN SND. The keypad remains active while in a conversation to allow additional numbers to be dialed. Simply press the PTT switch and dial the number. The number in the display does not change when a number is dialed in this manner. If you want to save the number in the display (see following information), make sure you do so before the dial mode is exited.

Storing Numbers in Memory

Up to ten 16-digit numbers can be stored in memory and later recalled. Proceed as follows to store a number:

1.Enter the number as described in the preceding “Dialing a Number” section.

2.To store the number, press FCN STR and the memory location from 0-9.

3.If there is already a number in the selected location, it is replaced by the new number. To clear a memory location, simply store a blank display.

38

Image 37

EFJohnson 7243 LTR-Net Portable UHF manual Dialing a Number, Sending the Number, Storing Numbers in Memory

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference Guide General Features Features Top Panel Controls Controls and Display Side Controls Display Busy UID Controls and Display FCN Scan Front Panel Keys SYS RCL Dial Standard Mode A/D Standard Mode SYS Setting Volume Levels Power-Up SequenceSystem/Group Display Mode Basic Operation System and Group Select Numeric Display Mode Transceiver Lock Keypad Disable Option Switches Low Battery IndicationLTR-Net, LTR, and Conventional Operation Basic Operation Call Indicator General FeaturesBank Select Proceed Clear-To-Talk Tone Home System/Group SelectReceive-Only Groups Standard Group Calls Time-Out TimerTone Select General LTR-Net and LTR Operation Placing a Standard Group Call Receiving a Standard Group Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call Landside-Originate Telephone Calls LTR-NET Auxiliary CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu Mode Introduction Menu Mode Menu Mode Flowchart Selecting Dial Mode Dial ModeIntroduction Sending the Number Dialing a NumberStoring Numbers in Memory Placing Calls Without Selecting Dial Mode Exiting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scanning Transmit Inhibit LTR-NET and LTR FeaturesPriority Calls LTR-Net Standard Calls LTR-NET FeaturesLTR-Net Special Calls Busy Queuing Roaming Conventional Features LTR FeaturesSquelch Adjust Standard Group Calls Monitoring Before Transmitting Transmit Disable On Busy Monitor Mode Selected Call Guard Squelch Talk-Around Supervisory Tones Miscellaneous LTR-Net Special Call Tones Display Messages LTR Telephone Call Tones Miscellaneous Bank SEL Bank select Menu Mode Messages Alpha Numeric Rechargeable Battery Pack Miscellaneous Battery Charger Operation Speaking Into Microphone Charger IndicatorsOperation At Extended Range Index Transceiver ServiceLicensing Busy 14 Call 13 Index 002-7200-600