A/D Standard Mode | EFJohnson 7243 LTR-Net Portable UHF specification

CONTROLS AND DISPLAY

Dial Mode

6 - Dials the “6” digit.

7(S.A/D) Standard Mode

FCN S.A/D (System Add/Delete) - Changes the scan list status of the currently displayed system. The system is in the scan list and

scanned normally if “ S ” is displayed when not scanning.

7 - Pressing this key with the PTT switch pressed transmits the “7” digit.

Dial Mode

7 - Dials the “7” digit.

8(SEND)

Standard Mode

8 - Pressing this key with the PTT switch pressed transmits the “8” digit.

Dial Mode

8 - Dials the “8” digit.

FCN SEND - Automatically accesses the radio system and trans- mits the number in the display.

9(G.A/D) Standard Mode

FCN G.A/D (Group Add/Delete) - Changes the scan list status of the currently displayed group. The group is in the scan list and scanned normally if “ G” is displayed when not scanning.

9 - Pressing this key with the PTT switch pressed transmits the “9” digit.

Dial Mode

9 - Dials the “9” digit.

0 (STR) Standard Mode

FCN STR - Changes between the numeric and alpha display modes.

0 - Pressing this key with the PTT switch pressed transmits the “0” digit.

18

Image 17

EFJohnson 7243 LTR-Net Portable UHF manual A/D Standard Mode

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference Guide General Features Features Top Panel Controls Controls and Display Side Controls Display Busy UID Controls and Display FCN Scan Front Panel Keys SYS RCL Dial Standard Mode A/D Standard Mode SYS Setting Volume Levels Power-Up SequenceSystem/Group Display Mode Basic Operation System and Group Select Numeric Display Mode Transceiver Lock Keypad Disable LTR-Net, LTR, and Conventional Operation Low Battery IndicationOption Switches Basic Operation Bank Select General FeaturesCall Indicator Receive-Only Groups Home System/Group SelectProceed Clear-To-Talk Tone Standard Group Calls Time-Out TimerTone Select General LTR-Net and LTR Operation Placing a Standard Group Call Receiving a Standard Group Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call Placing LTR-Net Auxiliary Calls LTR-NET Auxiliary CallsLandside-Originate Telephone Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu Mode Introduction Menu Mode Menu Mode Flowchart Introduction Dial ModeSelecting Dial Mode Storing Numbers in Memory Dialing a NumberSending the Number Recalling Numbers From Memory Exiting Dial ModePlacing Calls Without Selecting Dial Mode System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scanning Priority Calls LTR-NET and LTR FeaturesTransmit Inhibit LTR-Net Standard Calls LTR-NET FeaturesLTR-Net Special Calls Busy Queuing Roaming Conventional Features LTR FeaturesSquelch Adjust Standard Group Calls Monitoring Before Transmitting Transmit Disable On Busy Monitor Mode Selected Call Guard Squelch Talk-Around Supervisory Tones Miscellaneous LTR-Net Special Call Tones Display Messages LTR Telephone Call Tones Miscellaneous Bank SEL Bank select Menu Mode Messages Alpha Numeric Rechargeable Battery Pack Miscellaneous Battery Charger Operation Operation At Extended Range Charger IndicatorsSpeaking Into Microphone Licensing Transceiver ServiceIndex Busy 14 Call 13 Index 002-7200-600