Option Switches and Menu Mode | EFJohnson 7243 LTR-Net Portable UHF

OPTION SWITCHES AND MENU MODE

The transceiver may be programmed so responses always occur on the last selected group. In this case, the group may need to be manually changed to respond to these calls (see “Transmitting In The Scan Mode” on page 43). Unique ID and Directed Group calls can also be placed from a landside telephone. The same numbers are dialed as when the call is mobile originated. Contact your system operator for more information on how to place these calls.

OPTION SWITCHES AND MENU

MODE

Menu Mode and Option Switch Functions

	Function	Menu Items	Option	See Descrip.
	Function	Menu Items	Switch	on Page
			Switch	on Page

	Backlight mode select	BACKLGHT		20
	Bank select	BANK SEL		25
	Monitor mode select		X	50
	Roaming on-off [2]	ROAMING		47
	Scan type select	SCN TYPE		40
	Scan continue on-off	SCN CONT		43
	Scan list save mode	SCN SAVE		42
	Tone type select	TONES		27
	Any keypad function		[3]

NOTES:

1.Functions left blank are not available. [2] Available with LTR-Net operation only.

[3] The option switches can be programmed for any of the functions selectable by the keypad keys except 0-9.

34

Image 33

EFJohnson 7243 LTR-Net Portable UHF manual Option Switches and Menu Mode, Menu Mode and Option Switch Functions

Contents

Operating Manual Page Safety Training Information Electromagnetic Interference/Usage Compatibility Table of Contents Table of Contents Table of Contents Busy Quick Reference Guide General Features Features Top Panel Controls Controls and Display Side Controls Display Busy UID Controls and Display FCN Scan Front Panel Keys SYS RCL Dial Standard Mode A/D Standard Mode SYS Setting Volume Levels Power-Up SequenceSystem/Group Display Mode Basic Operation System and Group Select Numeric Display Mode Transceiver Lock Keypad Disable Low Battery Indication Option SwitchesLTR-Net, LTR, and Conventional Operation Basic Operation General Features Call IndicatorBank Select Home System/Group Select Proceed Clear-To-Talk ToneReceive-Only Groups Standard Group Calls Time-Out TimerTone Select General LTR-Net and LTR Operation Placing a Standard Group Call Receiving a Standard Group Call Conventional Operation Placing Telephone Calls Telephone Calls Receiving a Telephone Call LTR-NET Auxiliary Calls Landside-Originate Telephone CallsPlacing LTR-Net Auxiliary Calls Receiving Auxiliary Calls Menu Mode and Option Switch Functions Option Switches and Menu Mode Introduction Menu Mode Menu Mode Flowchart Dial Mode Selecting Dial ModeIntroduction Dialing a Number Sending the NumberStoring Numbers in Memory Exiting Dial Mode Placing Calls Without Selecting Dial ModeRecalling Numbers From Memory System and Group Scanning System and Group Scanning Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan Mode System and Group Scanning LTR-NET and LTR Features Transmit InhibitPriority Calls LTR-Net Standard Calls LTR-NET FeaturesLTR-Net Special Calls Busy Queuing Roaming Conventional Features LTR FeaturesSquelch Adjust Standard Group Calls Monitoring Before Transmitting Transmit Disable On Busy Monitor Mode Selected Call Guard Squelch Talk-Around Supervisory Tones Miscellaneous LTR-Net Special Call Tones Display Messages LTR Telephone Call Tones Miscellaneous Bank SEL Bank select Menu Mode Messages Alpha Numeric Rechargeable Battery Pack Miscellaneous Battery Charger Operation Charger Indicators Speaking Into MicrophoneOperation At Extended Range Transceiver Service IndexLicensing Busy 14 Call 13 Index 002-7200-600