12 Chapter2AdjustingScreens

2-2. Adjusting Color

● To select the display mode (CAL Switch mode)
This function allows easy selection of a desired mode accordi ng to monitor application.
Display Modes
Mode Purpose
1-DICOM AvailabletodisplayinDICOMmode.
2-Custom Selectoneoftheseusermodestodeneadesir edsetofparametersettings.
3-CAL1 Displaysthescreenadjustedbycalibrationsoft ware.
4-CAL2
5-CAL3
6-Hybrid-γ Automaticallyident iesthedisplayareaforthemonochromeandcolo rimagesonthe
samescreen,anddisplayseachsetstatus.
7-sRGB SuitableforcolormatchingwithsRGBcompatib leperipherals.
8-Text Suitablefordisplayingtextsforwordprocessingorspreadsheets.
Themodemenu
appears.
Procedure
1. Press .
The mode menu appears at the bottom left of t he screen.
2. The mode among the lis t is highlighted in turn each t ime is pressed.
You can switch the mode with or while the mode menu is displayed.
→ 1-DICOM←→2-Custom←→3- CAL1←→4-CAL2←→5-CA L3←→6-Hybrid -γ←→ 7-sRGB←→ 8-Text ←
Note
• The Adjustme nt menu and the Mode menu cannot be displayed at the s ame time.
● To perform advanced adjustments
<Color> of the Adjustment menu allows you to congure and save a separate set of color settings for each
mode.
Attention
• The monitor w ill take about 30 minutes before its inte rnal electric components st abilize. Wait 30 minutes or more
after turning the mon itor power on before starting adjust ment.
• The same i mage may be seen in different colors on multiple mon itors due to their monitor-specic cha racteristics.
Make ne color adjustment visually when mat ching colors on multiple monitors.
Note
• The values shown i n “%” or “K” are available only as reference.