46 Appendix
Recommended separation distances between portable and mobile RF communications equipment and the RadiForce Series
TheRadiForceseriesisintendedforuseinanelectromagneticenvironmentinwhichradiatedRFdisturbances
arecontrolled.ThecustomerortheuseroftheRadiForceseriescanhelppreventelectromagneticinterferenceby
maintainingaminimumdistancebetweenportableandmobileRFcommunicationsequipment(transmitters)andthe
RadiForceseriesasrecommendedbelow,accordingtothemaximumoutputpowerofthecommunicationsequipment.
Ratedmaximumoutput
poweroftransmitter
W
Separationdistanceaccordingtofrequencyoftransmitter
m
150kHzto80MHz
d=1.2 P
80MHzto800MHz
d=1.2 P
800MHzto2.5GHz
d=2.3 P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance “d”
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where “P” is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE1 At80MHzand800MHz,theseparationdistanceforthehigherfrequencyrangeapplies.
NOTE2 Theseguidelinesmaynotapplyinallsituations.Electromagneticpropagationisaffectedbyabsorptionand
reectionfromstructures,objectsandpeople.
Cable length
PowerCord: Accessary 2.0m
SignalCable(DD200-DL): Accessary 2.0m
SignalCable(PP200): Accessary 2.0m
USBCable(MD-C93): Accessary 1.8m