16 Chapter2AdjustingScreens
● To adjust gain <Gain>
The brightness of each color component red, green, and blue is called “G ain”. You can change the hue of
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjust ment menu, and press .
2. Choose <Advanced Sett ings> from <Color>, and press .
3. Choose <Gain>, and press .
4. Choose the color to adjust f rom <Red>, <Green>, and <Blue>, and then press .
5. Use or for adjustment.
6. Press to exit.
Attention
• Using this f unction may make some color gradat ions unavailable for display.
Note
• The value of gain cha nges with that of color temperatur e.
• When gai n is changed, the color temperatu re is changed to “User”.
● To set the mode in the monochrome display area <Hybrid Area>
The mode suitable for the monochrome image display area can be set (see “To select the display mode (CAL
Switch mode)” (page 12)).
Adjustable range
DICOM, CAL1, CAL2, CAL3
Procedure
1. Choose <Color> from the Adjust ment menu, and press .
2. Choose <Hybrid Area > from <Color>, and press .
3. Use or for adjustment.
4. Press to exit.
Attention
• You cannot select any mode for which Mode Pr eset is “Off” (see “3-1. Enabling/Disabli ng Mode Selection <Mode
Preset>” (page 19)).
• If all <Mode Pres et> for DICOM/CAL1/CAL2/CAL3 are set to “Off”, the mode selected la st is set.
Note
• The mode excluding t he monochrome image display area is “Cu stom” mode.
• The Bright ness is the same as the value for the mode select ed. To change the brightness, use the mode selecte d for
adjustment.