21
Chapter3SettingMonitor
3-7. Enabling/Disabling DC5V output
This function allows you to enable/disable the DC5V output.
Procedure
1. Press to turn off the monitor.
2. Holding down, press for at least two seconds to turn on the monitor.
The Optional Settings menu appea rs.
3. Choose <DC5V Output > from <Optional Settings>, and press .
4. Select ”On” or “Off ” with or , and press .
5. Select “Finish” with or .
6. Press .
The Optional Settings menu is closed.
3-8. Setting the Input Signals <Signal Selection>
Signals can be selected based on your operating environ ment (DVI signal input).
Attention
• A support ed graphics board is requir ed to display.
• Refer to the manu al of the graphics board.
Procedure
1. Press to turn off the monitor.
2. Holding down, press for at least t wo seconds to turn on the monitor.
The Optional Settings menu appea rs.
3. Choose <Signal Selection> f rom <Optional Settings>, and press .
4. Select “Dual Lin k” or “Single Link” with or, and press .
5. Select “Finish” with or, .
6. Press .
The Optional Settings menu is closed.