Putting the door glass back

1.From above insert the door glass at an angle into the door profile at the bottom edge of the door and lower it.

2.Take hold of the door trim (B) at each side, position it on the inside edge of the door and plug the door trim(B) into the upper edge of the door.

3On the open side of the door

trim (B) there is a guide bar (C). This must be pushed between the outer door panel and the guide corner(D). The clip seal (E) must be snapped in.

44

Page 44
Image 44
Electrolux B3150-4 manual Putting the door glass back