Emerson manual ENGINEERING ASSISTANT SOFTWARE Installation and Setup, Rosemount 3051S

Rosemount 3051S

Reference Manual

00809-0200-4801, Rev BA April 2007

ENGINEERING ASSISTANT SOFTWARE

Installation and Setup

If you already own a National Instruments Fieldbus interface device, you can go to rosemount.com to download the 3051S revision 23 Device Description. If you don’t already own a National Instruments Fieldbus interface device, contact your local sales person for ordering options.

NOTE

Could affect block execution times.

Installing the 3051S Engineering Assistant for FOUNDATION Fieldbus

Operation of the software requires installation of both the 3051S Engineering Assistant (EA) for FOUNDATION Fieldbus program and FOUNDATION Fieldbus communication card drivers. The 3051S Engineering Assistant for FOUNDATION Fieldbus and 3051S Engineering Assistant for HART can be loaded onto the same computer. However, the programs cannot be opened simultaneously. Upgrades for the 3051S Engineering Assistant are available on www.rosemount.com.

1.Follow the instructions below to complete required software installation.

a.Place 3051S EA Software CD-ROM disk 2 into the disk drive.

b.Browse and select the EA-Ff folder using Windows NT, 2000, or XP.

c.Open the ReadMe.txt file and follow the instructions provided.

2.Install the FOUNDATION Fieldbus PCMCIA communications card into the machine by following instructions provided with the card. Installation of the communications card is not required for offline operation of the 3051S EA for FOUNDATION Fieldbus software program.

3-28