Supported Commands
2
2.1Standard IPMI Commands
The IPMC is fully compliant to the Intelligent Platform Management Interface v.1.5. This section provides information about the supported IPMI commands.
2.1.1Global IPMI Commands
The IPMC supports the following global IPMI commands.
Table
Command | NetFn (Request/Response) | CMD | Comments |
|
|
|
|
Get Device ID | 0x06/0x07 | 0x01 | - |
|
|
|
|
Cold Reset | 0x06/0x07 | 0x02 | - |
|
|
|
|
Warm Reset | 0x06/0x07 | 0x03 | - |
|
|
|
|
Get Self Test Results | 0x06/0x07 | 0x04 | - |
|
|
|
|
Get Device GUID | 0x06/0x07 | 0x08 | - |
|
|
|
|
2.1.2System Interface Commands
The system interface commands are supported by blades providing a system interface.
Table
| Command | NetFn (Request/Response) | CMD |
|
|
|
|
|
|
| Set BMC Global Enables | 0x06/0x07 | 0x2E |
|
|
|
|
|
|
| Get BMC Global Enables | 0x06/0x07 | 0x2F |
|
|
|
|
|
|
| Clear Message Flags | 0x06/0x07 | 0x30 |
|
|
|
|
|
|
| Get Message Flags | 0x06/0x07 | 0x31 |
|
|
|
|
|
|
| Get Message | 0x06/0x07 | 0x33 |
|
|
|
|
|
|
| Send Message | 0x06/0x07 | 0x34 |
|
|
|
|
|
|
| Set Channel Access | 0x06/0x07 | 0x40 |
|
|
|
|
|
|
| Get Channel Access | 0x06/0x07 | 0x41 |
|
|
|
|
|
|
| Get Channel Info | 0x06/0x07 | 0x42 |
|
|
|
|
|
|
| Set User Access | 0x06/0x07 | 0x43 |
|
|
|
|
|
|
| Get User Access | 0x06/0x07 | 0x44 |
|
|
|
|
|
|
| Set User Name | 0x06/0x07 | 0x45 |
|
|
|
|
|
|
|
|
|
|
|
15 | ||||
