Emerson ATCA-7350 System Boot Options Parameter #5, Chassis Device Commands Supported Commands

Chassis Device Commands Supported Commands

2.1.7.1.1System Boot Options Parameter #5

This boot parameter is implemented as specified within the IPMI specification, but not all flags are supported.

Table 2-9 System Boot Options Parameter #5

Data Byte	Description
1	[7]	- 1b = boot flags valid. The bit should be set to indicate that valid flag data is
	present. This bit may be automatically cleared based on the boot flag valid bit
	clearing parameter, above.
	[6]	- Not supported.
	[5]	- Not supported
	[4:0] - reserved
2	[7]	- 1b = CMOS clear
	[6]	- Not supported
	[5:2] - Boot device selector
	0000b		= No override
	0001b		= Force PXE
	0010b		= Force boot from default Hard-drive
	0011b		= Not supported
	0100b		= Not supported
	0101b		= Force boot from default CD/DVD
	0110b		= Not supported
	0111b-1110b = Reserved
	1111b		= Force boot from Floppy/primary removable media
	[1]	- 1b = Not supported
	[0]	- 1b = Not supported
3	Not supported
4	Not supported
5	Reserved

ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E) 19