Serial Output Commands | Supported Commands |
|
|
2.3.1.2.1Request Data
The following table lists the request data applicable to the Get Serial Output command.
Table 2-18 Request Data of Get Serial Output Command
Byte | Data Field |
|
|
1 | LSB of Emerson IANA Enterprise number. A value of 0xCD has to be used. |
|
|
2 | Second byte of Emerson IANA Enterprise number. A value of 0x65 has to be used. |
|
|
3 | MSB of Emerson IANA Enterprise number. A value of 0x00 has to be used. |
|
|
4 | Serial connector type |
| 0: Face plate connector |
| All other values are reserved. |
|
|
5 | Serial connector instance number. A sequential number that starts from 0. |
|
|
2.3.1.2.2Response Data
The following table lists the response data applicable to the Get Serial Output command.
Table 2-19 Response Data of Get Serial Output Command
Byte | Data Field |
|
|
1 | Completion code |
|
|
2 | LSB of Emerson IANA Enterprise number. |
|
|
3 | Second byte of Emerson IANA Enterprise number. |
|
|
4 | MSB of Emerson IANA Enterprise number. |
|
|
5 | Serial output selector |
|
|
25 |
