![](/images/new-backgrounds/1163608/16360821x1.webp)
CONNECTIONS
If using an antenna, follow the instructions on pages 10 and 11. If you are a cable TV (CATV) subscriber, skip ahead to page 12 for proper connections.
Antenna to VCR connection; The VCR must be connected "between" the antenna and the TV. First, remove the antenna from the TV and connect it to the VCR. Then connect the VCR to the TV. Below are 3 common methods of connecting an antenna system to a VCR. Find the type of antenna system you are using and follow the connection diagram. After you have connected the antenna to the VCR, connect the VCR to the TV as described on the next page.
This VCR has a single 75 ohm antenna input for connection to an antenna (VHF/UHF) or cable (CATV) sys- tem. If you have separate VHF and UHF antennas (number 3 below), use a mixer to connect the antennas to the VCR.
1 Combination VHF/UHF Antenna with 75 ohm coaxial cable
ANT. IN
AUDIO
RF OUT
OUT IN
3CH 4
VIDEO
To TV
75 Ohm Coaxial Cable
2 Combination VHF/UHF Antenna with 300 ohm
|
| ANT. IN |
| AUDIO | |
| OUT | RF OUT |
| IN | |
|
| 3CH 4 |
| VIDEO | |
300 Ohm | To TV | |
Transformer (Not Supplied) |
|
3 Separate VHF and UHF Antennas
ANT. IN
AUDIO | |
OUT | RF OUT |
IN | |
| 3CH 4 |
VIDEO |
To TV
Combiner
(Not Supplied)
IF USING A VHF OR UHF ANTENNA, SET THE TV/CATV MENU OPTION TO THE "TV" POSITION.
10