BASIC PLAYBACK
PREPARATION
Set the CH 3/CH 4 switch on the rear of the VCR to either CH 3 or 4, and then tune your TV to the same.
LOADING
Upon inserting a prerecorded cassette, the power will turn on automatically even if the power is off.
PLAY
Press the PLAY key, and playback will start. When loading a tape without the erase prevention tab intact, playback will start immediately.
The tape is rewound automatically to the beginning after playing to the end of tape.
STOP
Press the STOP key.
The tape will stop but remain fully loaded and ready to play.
FAST FORWARD
Press the FF key in the STOP mode. The tape advances at high speed without picture and sound.
REWIND
Press the REW key in the STOP mode. The tape is rewound at high speed without picture and sound.
EJECT
Press the EJECT key on the remote control or press the STOP/EJECT key twice on the front panel.
The tape will eject from the compartment.
18
